It is currently Sun Nov 18, 2018 9:51 am

 

Furniture Sign Project

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 539
Joined: Sun Mar 11, 2012 4:40 pm

Furniture Sign Project

Postby rdj357 » Thu Oct 11, 2018 6:14 pm

Finished up a furniture store project today. I made and installed the pole sign and the facade. The pole sign is 25' tall, the circle is 10' diameter. The black is the back layer then the white stands 3" in front of that with the 'O' and couch cushion spaced 1.5" in front of that. White lights between the white and black layer and red lights behind the red layer. No pics of it lit yet but the facade is amazing at night!

20180621_131417.jpg

FB_IMG_1537293298466.jpg

20181011_122644.jpg

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC

Learn Plasmacam Website
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube

User avatar
WyoGreen
Elite Contributing Member
Elite Contributing Member
Posts: 674
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: Furniture Sign Project

Postby WyoGreen » Thu Oct 11, 2018 6:41 pm

Very nice. Looks like quite a bit of work went into it. The night time picture is quite nice, congrat's on a job well done.

Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
CNC Router table

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1455
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Furniture Sign Project

Postby little blue choo » Sat Oct 13, 2018 12:50 am

Nice job Robert.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

BAR M
Posts: 186
Joined: Thu Jul 11, 2013 8:46 pm

Re: Furniture Sign Project

Postby BAR M » Sat Oct 13, 2018 7:55 am

Very impressive. Well done.

User avatar
dgeorgester
Posts: 107
Joined: Wed Oct 24, 2012 7:20 pm
Location: Halifax, Nova Scotia, Canada

Re: Furniture Sign Project

Postby dgeorgester » Tue Oct 16, 2018 5:35 am

Super nice !!!!
Samson 510
Hypertherm Powermax 85, Lincoln 256
AutoCAD

TrinityFabworks
Posts: 58
Joined: Tue Apr 17, 2018 2:36 pm

Re: Furniture Sign Project

Postby TrinityFabworks » Tue Oct 16, 2018 10:26 am

this looks great

User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 539
Joined: Sun Mar 11, 2012 4:40 pm

Re: Furniture Sign Project

Postby rdj357 » Wed Oct 17, 2018 9:03 am

Thank you all, it was a fun project. I lit it up and am going to add some more white lights. It would look great except it's not nearly as bright as the facade and next to it, looks a little dim - good thing I used a large enough transformer to load it up with some more lights! :-D
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC

Learn Plasmacam Website
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1414
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Furniture Sign Project

Postby tnbndr » Wed Oct 17, 2018 8:12 pm

It would look great except it's not nearly as bright as the facade and next to it, looks a little dim


Nice job! I actually think the facade is too bright, looks washed out. I think they should change theirs!!
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 539
Joined: Sun Mar 11, 2012 4:40 pm

Re: Furniture Sign Project

Postby rdj357 » Wed Oct 17, 2018 8:53 pm

tnbndr wrote:
It would look great except it's not nearly as bright as the facade and next to it, looks a little dim


Nice job! I actually think the facade is too bright, looks washed out. I think they should change theirs!!


I did that too :-) That pic is one that someone took and posted to Facebook so it's not great quality. I have a better one I'll post that is a better representation of what it looks like. It's killer at night. I want the pole sign to match. :-D
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC

Learn Plasmacam Website
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube


Return to “CNC Plasma Cutter Project Picture Gallery”

Who is online

Users browsing this forum: No registered users and 9 guests

Easyscriber engrave attachment for Hypertherm torch's