Easyscriber engrave attachment for Hypertherm torch's
 

Learning to paint.

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
Post Reply
Rtodahl01
Posts: 71
Joined: Mon Oct 02, 2017 3:39 pm

Learning to paint.

Post by Rtodahl01 » Sun Jan 14, 2018 2:35 pm

20180114_112005.jpg

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1457
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Learning to paint.

Post by little blue choo » Sun Jan 14, 2018 3:14 pm

Looks very good for rattle can.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

User avatar
SegoMan DeSigns
Posts: 104
Joined: Sat Jan 06, 2018 4:45 pm

Re: Learning to paint.

Post by SegoMan DeSigns » Sun Jan 14, 2018 3:27 pm

Looks fine..

I tried the painting (4-colors) on an intricate piece it was looking great until the clear coat wrinkled :( I went back and did layers for each color, drilled & tapped the base metal (16 ga) and bolted the pieces together with button head SS machine screws.

Lessons learned.

Rtodahl01
Posts: 71
Joined: Mon Oct 02, 2017 3:39 pm

Re: Learning to paint.

Post by Rtodahl01 » Sun Jan 14, 2018 4:12 pm

I didn't clear coat for fear of that happening.

User avatar
SegoMan DeSigns
Posts: 104
Joined: Sat Jan 06, 2018 4:45 pm

Re: Learning to paint.

Post by SegoMan DeSigns » Thu Jan 18, 2018 8:04 pm

I had tape lines I had to sand down, it was an all day paint project then poof it's wrinkle time!

Post Reply