Dallas Cowboys

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
Post Reply
cpstang1967
2 Star Member
2 Star Member
Posts: 90
Joined: Sat Nov 17, 2012 9:39 pm
Location: West Richland, WA

Dallas Cowboys

Post by cpstang1967 »

Did this for a friend...didn't turn out too bad (for the cowgirls) ;)
1896931_10204787344637722_4231415705875787437_n.jpg
shinertx
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 287
Joined: Wed Aug 27, 2014 12:03 pm
Location: Shiner

Re: Dallas Cowboys

Post by shinertx »

cpstang1967 wrote:Did this for a friend...didn't turn out too bad (for the cowgirls) ;)
very nice like the color contrast. ok now need to see one for the Texans.
Samson 5x10
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
Joshwelder123
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Fri Aug 10, 2018 6:21 am

Re: Dallas Cowboys

Post by Joshwelder123 »

File?
Squatchemup
2 Star Member
2 Star Member
Posts: 93
Joined: Wed Aug 25, 2021 12:22 am

Re: Dallas Cowboys

Post by Squatchemup »

may i get the dxf for this
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Dallas Cowboys

Post by adbuch »

Here is a quick trace. Since this is a layered sign, you will need to cut out the letters separately and attach to the backer after painting. You can adjust the letters to suit your liking.
David
COWBOYS with STAR.dxf image.jpg
COWBOYS with STAR.dxf
(574.09 KiB) Downloaded 88 times
SRdesign
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 187
Joined: Tue Oct 22, 2019 10:10 pm

Re: Dallas Cowboys

Post by SRdesign »

David has you 99% there with the trace. There is a font on dafont.com call “cowboys” that is this exact same font. You can just type it in and size correctly for your top layer.
My 4x8 Build
DIY 4x8
C&CNC Bladerunner G5
Hypertherm PM85
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Dallas Cowboys

Post by adbuch »

SRdesign wrote: Fri Oct 08, 2021 7:11 am David has you 99% there with the trace. There is a font on dafont.com call “cowboys” that is this exact same font. You can just type it in and size correctly for your top layer.
Thanks for the tip on the cowboys font. I went ahead and revised my original file to include this. I think I've got it sized pretty close.
David
COWBOYS with STAR rev.1.dxf image.jpg
COWBOYS with STAR rev.1.dxf image.jpg (54.78 KiB) Viewed 922 times
COWBOYS with STAR rev.1.dxf
(644 KiB) Downloaded 86 times
SRdesign
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 187
Joined: Tue Oct 22, 2019 10:10 pm

Re: Dallas Cowboys

Post by SRdesign »

:Like Correction. David has you 100% taken care of.
My 4x8 Build
DIY 4x8
C&CNC Bladerunner G5
Hypertherm PM85
Squatchemup
2 Star Member
2 Star Member
Posts: 93
Joined: Wed Aug 25, 2021 12:22 am

Re: Dallas Cowboys

Post by Squatchemup »

thank you so much this is sweet gonna make for my game room
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Dallas Cowboys

Post by adbuch »

Squatchemup wrote: Fri Oct 08, 2021 8:51 pm thank you so much this is sweet gonna make for my game room
No problem! Be sure to post some photos when you finish it.
David
Post Reply

Return to “CNC Plasma Cutter Project Picture Gallery”