2 Sets of 16ft Gate Art
-
- 3.5 Star Elite Contributing Member
- Posts: 628
- Joined: Fri Jan 16, 2009 10:26 pm
2 Sets of 16ft Gate Art
It took a while to make this order. Customer wanted 16 ft of artwork for two 20ft gate frames that would butt up together. She supplied the silo and trees on the combine scene. I designed her New Holland Combine as well as her Versatile Tractor, the backgrounds as well as the wheat bundles to match the scenery. The 4x8 panels took an hour of cutting. The 4x4 wheat panels took 1-1/2 hours each. She was pleased.
-
- 2.5 Star Elite Contributing Member
- Posts: 211
- Joined: Mon May 07, 2018 5:27 pm
- Location: Moose Jaw Sask.
Re: 2 Sets of 16ft Gate Art
I'll bet she was, you did a super job.
-
- 5 Star Elite Contributing Member
- Posts: 2611
- Joined: Thu Jul 24, 2008 11:15 am
Re: 2 Sets of 16ft Gate Art
Amazing design work! Would love to see it completed and installed for sure!
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: 2 Sets of 16ft Gate Art
That is very nice.
I second photos of the final install.
I second photos of the final install.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 6 Star Elite Contributing Member
- Posts: 8687
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: 2 Sets of 16ft Gate Art
Great job! I would love to see some photos of the final installation as well. Keep up the good work.
David
David
- SegoMan DeSigns
- 4 Star Member
- Posts: 854
- Joined: Sat Jan 06, 2018 4:45 pm
Re: 2 Sets of 16ft Gate Art
That's my kind of gated community
-
- 3.5 Star Elite Contributing Member
- Posts: 628
- Joined: Fri Jan 16, 2009 10:26 pm
Re: 2 Sets of 16ft Gate Art
Thanks everyone. I'm hoping they send a photo of it installed. If they do, I'll post it.