fire pit

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
baker
Posts: 16
Joined: Tue May 25, 2010 10:19 am
Location: central Texas

fire pit

Post by baker » Fri Oct 29, 2010 2:32 pm

Here is a fire pit that I made recently. I was very happy with the cut quality on this 3/16" steel, and how it turned out overall. Every piece was plasma cut. I use a Dynatorch table with a Hypertherm 1650.

Image

After paint...
Image

User avatar
Scratch
Elite Contributing Member
Elite Contributing Member
Posts: 533
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: fire pit

Post by Scratch » Fri Oct 29, 2010 4:47 pm

Great idea for a fire pit. How many total pieces is it? Is the main ring one piece? I don't see the seam....
I think I'm the oldest 10 year old boy on the forum...

baker
Posts: 16
Joined: Tue May 25, 2010 10:19 am
Location: central Texas

Re: fire pit

Post by baker » Fri Oct 29, 2010 7:16 pm

I believe it was 17 total pieces. Yes the main ring was one piece, the seam was welded and cleaned up to blend with the bends.

User avatar
elkriverfab
Posts: 493
Joined: Mon Jul 27, 2009 4:49 pm

Re: fire pit

Post by elkriverfab » Sat Oct 30, 2010 4:30 am

Great fire pit!

I think I will make one like this to put out in the yard.

I love to BBQ over hardwood rather than charcoal, this would be great.

Did you come up with this design?

Very unique with the legs and side pieces.
"OK, Now hold my beer and I'll try it"

User avatar
Metal Lee
Elite Contributing Member
Elite Contributing Member
Posts: 191
Joined: Sun Oct 05, 2008 3:10 pm

Re: fire pit

Post by Metal Lee » Sat Oct 30, 2010 12:01 pm

Great Job Baker, looks good.
Thanks, Metal Lee
Keep the sparks out of your boots!

Twisted 1
Posts: 43
Joined: Thu Jan 28, 2010 9:47 am
Location: Ontario Canada

Re: fire pit

Post by Twisted 1 » Sat Oct 30, 2010 12:11 pm

Great job. It looks amazing. If you don't mind could you tell me the dimentions of the squares where the deer are. Thanks
Pete
Twisted Image Customs and Fabrication
Ontario Canada

baker
Posts: 16
Joined: Tue May 25, 2010 10:19 am
Location: central Texas

Re: fire pit

Post by baker » Sat Oct 30, 2010 12:45 pm

Thanks for the comments everyone. I made this specifically for and donated it to a hunting and outdoor event in my hometown that raises money for youth programs in the area. It was in the silent auction.

I did come up with the design and did all of the scenes also. Each panel is around 12x15, and the circle that the bucks scenes are in were about 10" diameter.

It also had a removable pole with a swing-over grill and pot-holder, but of course I procrastinated and sent those parts last minute so I never got a picture with it all together!

jcspake
Posts: 15
Joined: Wed Nov 30, 2011 9:58 am

Re: fire pit

Post by jcspake » Wed Dec 14, 2011 10:35 am

will you post the pcm of the squares for the scenes... I can not find them in the square design only round...

Thanks,

JS

User avatar
GoingCustom
Elite Contributing Member
Elite Contributing Member
Posts: 577
Joined: Wed Nov 10, 2010 2:53 pm
Contact:

Re: fire pit

Post by GoingCustom » Fri Dec 16, 2011 8:25 pm

craftsmanship looks great! Very clean! And I like the legs and foot rests, nice touch!
Travis
http://www.goingcustom.com
one of a kind gates, fine art and CNC designs

reidy01
Posts: 173
Joined: Sun Aug 21, 2011 3:32 am

Re: fire pit

Post by reidy01 » Sat Dec 17, 2011 5:47 am

Just looking at your design it's very nice well done but wouldn't it be a good idea to put some expanede metal in the bottom so the ash would drop out and let air in so it would burn better, I guess it would burn OK more for the ease of cleaning too, just a thought. Ouch that hurt.... :lol:

pemery

Re: fire pit

Post by pemery » Thu Aug 23, 2012 12:04 pm

do you have a basic template of the ring without the deer for sale???

metalart
Elite Contributing Member
Elite Contributing Member
Posts: 907
Joined: Thu Sep 03, 2009 10:43 am

Re: fire pit

Post by metalart » Thu Aug 23, 2012 8:09 pm

Nice work, thanks for sharing!

RobertJohnson
Elite Contributing Member
Elite Contributing Member
Posts: 488
Joined: Fri Feb 10, 2012 5:13 pm
Location: Cheyenne, WY

Re: fire pit

Post by RobertJohnson » Sat Aug 25, 2012 10:04 am

Great design, thanks for sharing! :D

Alyssa001
Posts: 1
Joined: Thu Jan 08, 2015 2:02 pm

Re: fire pit

Post by Alyssa001 » Thu Jan 08, 2015 2:09 pm

What are the dimensions for the legs?

alickjr
Posts: 1
Joined: Mon Jun 10, 2019 5:00 am

Re: fire pit

Post by alickjr » Tue Jul 09, 2019 11:39 am

The fire pit is super cool do you mind sharing the dxf file too thanks (of course if aint selling) :Yay

Post Reply

Return to “CNC Plasma Cutter Project Picture Gallery”

Easyscriber engrave attachment for Hypertherm torch's