Easyscriber engrave attachment for Hypertherm torch's
 

Ford F 250 Bumper

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
kiloiv
Posts: 2
Joined: Tue Dec 08, 2015 1:26 pm

Re: Ford F 250 Bumper

Post by kiloiv » Thu Dec 10, 2015 2:36 pm

I would like to buy the file via paypal. Let me know please

radicalrescue
Elite Contributing Member
Elite Contributing Member
Posts: 378
Joined: Thu May 28, 2015 8:02 am
Location: Merritt island fl.

Re: Ford F 250 Bumper

Post by radicalrescue » Thu Dec 10, 2015 9:45 pm

hello so might u have any dodge files ..if so pm me ur payple

Bobcat320
Elite Contributing Member
Elite Contributing Member
Posts: 409
Joined: Thu Jun 25, 2015 4:06 pm
Contact:

Re: Ford F 250 Bumper

Post by Bobcat320 » Fri Dec 11, 2015 12:47 pm

Very nice work! I have made several Dodge bumpers out of 1/4" aluminum that are very similar. That was before I had my machine, so I paid the steel yard to shear and brake them for me to my specs, then just welded them all up.
Last edited by Bobcat320 on Thu Mar 24, 2016 3:03 pm, edited 1 time in total.
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable

Why pierce it when you can punch it!

cheney0
Posts: 1
Joined: Mon Jul 07, 2014 6:56 pm

Re: Ford F 250 Bumper

Post by cheney0 » Tue Jan 19, 2016 10:44 pm

I'm interested in buying the file.

dr.dirty
Posts: 16
Joined: Tue Aug 04, 2015 10:55 am

Re: Ford F 250 Bumper

Post by dr.dirty » Sat Jan 23, 2016 3:27 pm

I kknow its an old post but i am interested in buying this file as well.

Madammetal
Posts: 35
Joined: Mon Dec 07, 2015 9:15 am
Location: Montana
Contact:

Re: Ford F 250 Bumper

Post by Madammetal » Wed Jan 27, 2016 8:21 pm

i wish we all could find a file. hell if i could find the mounting for one i would jus draw it myself. i dont want to drive around town with out a bumper while i do it

Cracker Red
Posts: 156
Joined: Sat May 03, 2014 3:24 pm

Re: Ford F 250 Bumper

Post by Cracker Red » Tue Feb 09, 2016 9:00 pm

Does anyone have contact info for Steve/MDU Customs/OP ?

visionsfabrication
Posts: 56
Joined: Mon Dec 31, 2012 3:44 pm

Re: Ford F 250 Bumper

Post by visionsfabrication » Wed Mar 09, 2016 2:52 pm

interested myself

Timmers999
Posts: 1
Joined: Tue Dec 15, 2015 11:02 pm

Re: Ford F 250 Bumper

Post by Timmers999 » Thu Mar 17, 2016 10:19 pm

Interested in the file also

User avatar
SCHIDTHEAD
Elite Contributing Member
Elite Contributing Member
Posts: 279
Joined: Fri Jan 08, 2010 12:28 am
Location: Under a Hood

Re: Ford F 250 Bumper

Post by SCHIDTHEAD » Thu Mar 24, 2016 3:01 pm

Yes it's available I accept paypal or credit card.
Contact me at: [email protected]
"Government, even in its best state, is but a necessary evil; in its worst state, an intolerable one."--Thomas Paine 1776

Yellowdodge2005
Posts: 18
Joined: Thu May 11, 2017 10:38 am

Re: Ford F 250 Bumper

Post by Yellowdodge2005 » Sun Jul 16, 2017 12:47 am

Do you have any pictures of your dodge bumpers

izzyscages
Posts: 3
Joined: Sun Jun 16, 2013 4:25 pm

Re: Ford F 250 Bumper

Post by izzyscages » Fri Mar 23, 2018 4:33 pm

Any chance you have a file for a rear bumper on an 01 Excursion?

Blb3432
Posts: 3
Joined: Tue Dec 04, 2018 3:07 pm

Re: Ford F 250 Bumper

Post by Blb3432 » Thu Dec 06, 2018 8:45 pm

Interested to buy

teeter1715
Posts: 1
Joined: Mon Jan 07, 2019 4:33 pm

Re: Ford F 250 Bumper

Post by teeter1715 » Mon Jan 07, 2019 4:40 pm

SCHIDTHEAD wrote:
Fri Dec 06, 2013 4:20 pm
MIFab wrote:Sweet Job! I have a F250 and I would like to put this on mine would you be willing to sell the dxf file?
Yes sir...I will sell the complete file including bumper (3 piece cut--top,mid,lower) mounting plates, gussets, full shackle plates, design layout and mounting plans in CAD .dxf format and bend angles for $150--this bumper sold for 8x that with the receiver and brush bar. The bumper will be blank you add your own air dams, light holes or patterns for customizing. File has 1/8" notches in the cut lines to match the break lines & keep your lines straight. When done right, all lines match perfectly. 3 horizontal face welds, build the mounts and chaah...ching.

Just the bumper skin with bend angles for $80 you design the mounting.

This is patterned off of a 2002 Ford F-250 though I beleive will fit '99 to 2003

As much as I would like to share my custom files for free, as a full time business owner, I cant. I invest a lot of CAD time (and in this case measuring and a prototype build) into all of my designs to make sure they work plasma friendly and cut ready the first time for me.

Feel free to let me know if you would like to have it, I can accept Paypal or CC
I have $150 for you if youre still selling the CAD/DXF file dm me please

donn92
Posts: 49
Joined: Fri Jun 05, 2015 6:47 pm

Re: Ford F 250 Bumper

Post by donn92 » Fri Mar 15, 2019 8:41 am

I was wondering if by any chance you have designed any bumpers for the newer f250 I have a 2016 and really like your work

cstroke
Posts: 94
Joined: Thu May 24, 2012 7:45 pm

Re: Ford F 250 Bumper

Post by cstroke » Tue Mar 19, 2019 8:15 am

$150. would be money well spent, not that anyone is disputing that.
Most shops thats just over 2 hrs of billable time, doubt you could figure this out in 2 hrs.
Great product.

Post Reply

Return to “CNC Plasma Cutter Project Picture Gallery”