Powermax 45xp Arc Voltage Connection
-
bogger44
- 2.5 Star Member
- Posts: 106
- Joined: Fri Dec 26, 2008 5:48 am
- Location: alberta, Canada
Powermax 45xp Arc Voltage Connection
hi i bought a new 45xp without the cpc port do i need the voltage divider card in it or can i hook up internally like the pm 1000? where to hook up would be great too. Thanks
-
djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1931
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: powermax 45xp
Toward the bottom is a link for the instructions to connect to raw arc voltage. You don't need the kit, just hook to the internal terminals. This is assuming you are using raw arc voltage on your 1000.
https://www.plasmaspider.com/viewtopic.php?t=23117
https://www.plasmaspider.com/viewtopic.php?t=23117
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 8618
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: powermax 45xp
Connect as shown to monitor raw arc voltage. If you need a voltage divider, then wire it between the raw arc voltage cables and your thc.
David
David
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
