ft02 and mp3700

CandCNC plasma table components discussion forum
Post Reply
mcmental
2.5 Star Member
2.5 Star Member
Posts: 133
Joined: Thu May 14, 2020 10:06 am

ft02 and mp3700

Post by mcmental »

hi there i have the ft02 sensor to go on the mp3700 and i got it with 12 pin round plug for the sensor and screwed terminals for the rear of mp3700 just struggling to work out where the yellow wire(in the blue plug) should be connected, any help would be great thanks.
cnc1.jpeg
cnc2.jpeg
cnc3.jpeg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: ft02 and mp3700

Post by acourtjester »

What about tech support????
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
mcmental
2.5 Star Member
2.5 Star Member
Posts: 133
Joined: Thu May 14, 2020 10:06 am

Re: ft02 and mp3700

Post by mcmental »

ive emailed them and also posted on the forum, no responses so thought i would ask here too so i can get on with the build.
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: ft02 and mp3700

Post by djreiswig »

2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
mcmental
2.5 Star Member
2.5 Star Member
Posts: 133
Joined: Thu May 14, 2020 10:06 am

Re: ft02 and mp3700

Post by mcmental »

All sorted now thanks
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1928
Joined: Fri Apr 17, 2009 11:48 am

Re: ft02 and mp3700

Post by weldguy »

Can you post your solution for others who may have this issue in the future?
mcmental
2.5 Star Member
2.5 Star Member
Posts: 133
Joined: Thu May 14, 2020 10:06 am

Re: ft02 and mp3700

Post by mcmental »

i have to remove the plugs that came on the cable and fit them as per the manual that is available to download.
Post Reply

Return to “CandCNC Forum”