What divider card ratio do you run on your system

CandCNC plasma table components discussion forum
Post Reply
User avatar
SegoMan DeSigns
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 822
Joined: Sat Jan 06, 2018 4:45 pm

What divider card ratio do you run on your system

Post by SegoMan DeSigns »

Tom,

I just bought a Hypertherm 105 that was tied into a 2 yo Bullteer system that has your controller on it, what ratio do you use off the Hyperthem system for the THC. I forgot to check the dip switches before I mounted it..OOPS

Thanks in advance,

Steve
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1928
Joined: Fri Apr 17, 2009 11:48 am

Re: What divider card ratio do you run on your system

Post by weldguy »

Could be 7:1or 50:1 depending on exactly what C&CNC module it was mated to. I would double check the divider card.
User avatar
SegoMan DeSigns
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 822
Joined: Sat Jan 06, 2018 4:45 pm

Re: What divider card ratio do you run on your system

Post by SegoMan DeSigns »

Thanks for the reply, I thought about doing a cut and measuring the voltage at the THC with it turned off but I better play it safe and do a visual.

Edit:

I just did the visual it was on 50:1 the 7:1 you mentioned is not an option on settings for the 105.
Post Reply

Return to “CandCNC Forum”