Miller Spectrum 2050 and "One Torch"

Discussion forum for Lincoln & Miller plasma cutters
Post Reply
Sierevello
Posts: 3
Joined: Mon Jul 01, 2019 3:53 pm

Miller Spectrum 2050 and "One Torch"

Post by Sierevello » Mon Jul 01, 2019 3:59 pm

Hello,

I would like to use my Miller Spectrum 2050 plasma cutter on a machine. The machine torches for CNC cutting are expensive and scarce. Does anyone know if the Thermal Dynamics "1 Torch" will directly interface to the Spectrum 2050? I have sent Thermal Dynamics 3 messages and have yet to hear back from them.

Thank You,
Steve

weldguy
Elite Contributing Member
Elite Contributing Member
Posts: 789
Joined: Fri Apr 17, 2009 11:48 am

Re: Miller Spectrum 2050 and "One Torch"

Post by weldguy » Tue Jul 02, 2019 11:37 am

Hey Steve

It will not directly interface with your 2050 but I remember a few years back Thermal Dynamics made adapters to allow the 1 Torch to be used on various brands and models of plasma cutters. You may be able to find an adapter. If I remember correcty the machine torch for the Millers back in the day were manufactured by Hypertherm. I would look to Miller for the correct torch if I was you.

cowboyupcustoms89
Posts: 20
Joined: Thu Jan 21, 2021 10:40 am

Re: Miller Spectrum 2050 and "One Torch"

Post by cowboyupcustoms89 » Thu Jan 21, 2021 10:48 am

Hey Steve

I am currently in the same position and I was wondering what you ever found out on the 2050 machine torch problem I would love to get away from my hand held torch so that I can start using a magnetic breakaway system.

ralphieboy127
Posts: 7
Joined: Sun Dec 16, 2018 9:41 am

Re: Miller Spectrum 2050 and "One Torch"

Post by ralphieboy127 » Mon May 31, 2021 7:22 am

Hello,
I have a 2050 too. And I ordered a torch from Larry at Weld mart in Texas, It was a direct fit and works great !!!
consumables for the torch are dirt cheap and could be found anywhere.
Good Luck, Ralph
If you have any questions let me know

Bigsipper
Posts: 1
Joined: Tue Jul 20, 2021 2:56 pm

Re: Miller Spectrum 2050 and "One Torch"

Post by Bigsipper » Tue Jul 20, 2021 3:11 pm

nvrmd....

Post Reply

Return to “Lincoln & Miller Plasma Cutters”

Industry Pros use FastCut CNC