Image
October EasyScriber Giveaway
Industry Pros use FastCut CNC

Everlast 82i cnc connector

Discussion forum for Everlast & Longevity plasma cutters
Post Reply
Elitemetalfab
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Fri May 15, 2020 2:09 am

Everlast 82i cnc connector

Post by Elitemetalfab » Mon May 18, 2020 7:24 pm

I recently bought a arclight dynamics 9600 table and have an everlast 82i plasma. The table/computer came with a pwmiia sensor for dthc with 6 wires that i need to pin into the everlast cnc connector, just not sure which pins they need to be attached to. Has anyone used an everlast plama with the pwmIIa sensor? any input or knowledge would be appreciated, neither manual seems to answer the question i have.

weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1285
Joined: Fri Apr 17, 2009 11:48 am

Re: Everlast 82i cnc connector

Post by weldguy » Mon Jun 29, 2020 12:57 pm

Not very familiar with what your working with but I believe you need RAV01 or RAV02 card to go with that. Can you post a pic of what your working with and the 6 wires your referring to?

eddieburnsii
1 Star Member
1 Star Member
Posts: 15
Joined: Thu Oct 15, 2009 11:00 am
Location: Gallagher, WV
Contact:

Re: Everlast 82i cnc connector

Post by eddieburnsii » Thu Aug 18, 2022 3:20 pm

Has no one figured this combo out yet? I have the same issue with the pwmIIa and a primeweld cut60

adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 5787
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Everlast 82i cnc connector

Post by adbuch » Sat Aug 20, 2022 10:32 am

eddieburnsii wrote:
Thu Aug 18, 2022 3:20 pm
Has no one figured this combo out yet? I have the same issue with the pwmIIa and a primeweld cut60
I think your best bet would be to contact Arclight for their take on it. It shouldn't be to hard to match up the pins as long as you have copies of the manuals for you cutter and the thc for the table. You may find the attached instructions helpful.
David

https://www.candcnc.net/images/Manuals/PWMII_Update.pdf
thc.jpg

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here


Post Reply

Return to “Everlast & Longevity Plasma Cutters”

Industry Pros use FastCut CNC