Everlast ipt 60s Consumables

Discussion forum for Everlast & Longevity plasma cutters
Post Reply
CleanCutCreations
Posts: 7
Joined: Tue May 28, 2019 1:48 pm

Everlast ipt 60s Consumables

Post by CleanCutCreations » Sun Jun 02, 2019 11:33 am

Are there different consumables needed switch between when you change your cutting anps?
All I see on Everlast website is 1.1mm and they sent me some 1.2mm.
I know other brands have many different tips, depending on what your cutting amps are set at.

rdwesley
Posts: 2
Joined: Mon Jul 09, 2018 8:24 pm

Re: Everlast ipt 60s Consumables

Post by rdwesley » Wed Jun 12, 2019 12:13 am

I buy my supplies from PlasmaDyn. They have different size tips for different amp ratings.

Post Reply

Return to “Everlast & Longevity Plasma Cutters”

Easyscriber engrave attachment for Hypertherm torch's