LDR Rotary Add on system

LDR plasma table discussion forum
Post Reply
Posts: 118
Joined: Wed Sep 09, 2009 11:18 pm

LDR Rotary Add on system

Post by dhelfter » Fri May 22, 2015 2:42 pm

Some pictures of our newest rotary add on system for our flat table. Some of the features/advantages:
Handles 1" to 10" diameter
Handles up to 300lb pipe/tube
Pipe/tube rests on roller trollies, allows pipe to be loaded then "rolled" in to chuck. Easy one man operation
Set up on long side of machine, so can handle pipe as lnog as your machine travel.
Separate structure, allows it to be stored elsewhere when not in use.Also allows it to be set up at front of machine.
Uses chuck for rotation. This allows positive grip with pipe, no chance of slip or walk like with band drive systems.
All this and needed software for $2000
LDR Motion Systems
m_rotary add on 007.jpg
m_rotary add on 007.jpg (13.43 KiB) Viewed 899 times
m_rotary 003.jpg
m_rotary 003.jpg (15.22 KiB) Viewed 899 times
m_rotary 002.jpg
m_rotary 002.jpg (20.82 KiB) Viewed 899 times
m_rotary 001.jpg
m_rotary 001.jpg (20.69 KiB) Viewed 899 times
m_rotary add on 21.jpg
m_rotary add on 21.jpg (22.65 KiB) Viewed 899 times

User avatar
Elite Contributing Member
Elite Contributing Member
Posts: 1454
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI

Re: LDR Rotary Add on system

Post by tnbndr » Sat May 23, 2015 7:38 am

Looks good. Are you going to have some type of retracting caster system on it for mobility?
Can it be retrofitted to older tables?
LDR 4x8, Scribe, DTHCIV
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 215
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3

User avatar
Posts: 530
Joined: Sun Sep 15, 2013 4:26 pm
Location: Motown

Re: LDR Rotary Add on system

Post by _Ogre » Sat May 23, 2015 11:12 am

nice rotary setup
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley :mrgreen: how cool!

Post Reply

Return to “LDR Motion Systems”

Easyscriber engrave attachment for Hypertherm torch's