LDR Support

LDR plasma table discussion forum
Post Reply
User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1554
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

LDR Support

Post by tnbndr » Thu Sep 30, 2021 9:27 am

I purchased my LDR 4x8 in 2014 and it gets used a decent amount. The mini desktop is kept by the table in my shop where painting, grinding and all other sorts of crap gets done. Well it finally, the hard drive, took a dump this summer.
I purchased a similar desktop off ebay and proceeded to set it up via instructions that Dan at LDR provided in 2014 on a thumb drive along with other important backup files. Well things weren't lining up and I had problems. Shot an email off to Dan with some photos of error messages, etc.
He responded with suggestions and over the course of several days he guided me back to where I was when everything crashed.
So just a shout out to continued support from LDR after 7 years.
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

weldguy
Elite Contributing Member
Elite Contributing Member
Posts: 868
Joined: Fri Apr 17, 2009 11:48 am

Re: LDR Support

Post by weldguy » Fri Oct 01, 2021 11:47 am

Good to hear. The way it ought to be :Like :Like

Post Reply

Return to “LDR Motion Systems”

Industry Pros use FastCut CNC