thoughts on my new LDR table

Don't see your table manufacturer listed above? Post here in this forum.
Post Reply
58er
1 Star Member
1 Star Member
Posts: 13
Joined: Sun Apr 21, 2019 7:29 am

thoughts on my new LDR table

Post by 58er »

Bought a new 4x4 table from Dan at LDR, have had it for about a month now and slowly getting the hang of it,
few things , first the quality. absolutely top notch, I looked around for quite a bit before i decided on LDR, I would recommend to anyone, very solid and well built .
second , the support. Dan knows these machines inside and out. period. he has had the answer to every stupid question and situation I've gotten myself into. --also very patient and responsive.....
Looking forward to many years of cutting
thanks Dan.
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2553
Joined: Thu Jul 24, 2008 11:15 am

Re: thoughts on my new LDR table

Post by plasmanewbie »

:Like
sr guy
2 Star Member
2 Star Member
Posts: 55
Joined: Tue Jul 07, 2015 8:10 am

Re: thoughts on my new LDR table

Post by sr guy »

Dan is an awesome Guy! Great to work with.
LDR 4x8 w scribe :D
Miller syncrowave 250
Hobart ironman 230
Baliegh tn 250
Bantam 12 ton 48"
JD2 model 32
User avatar
ColoradoWayne
2.5 Star Member
2.5 Star Member
Posts: 249
Joined: Fri Dec 06, 2013 4:48 pm
Location: Colorado Springs, CO

Re: thoughts on my new LDR table

Post by ColoradoWayne »

I've had my LDR table for over 5 years with the same experience. Still running strong!
Wayne
LDR Motion Systems 4 x 4 water table
Hypertherm Powermax 65
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1668
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: thoughts on my new LDR table

Post by tnbndr »

I have had my LDR 4x8 for over 6 years with nothing but minor, mostly operator errors. I just had an issue with the gantry twisting, sent Dan an email with a video. Within an hour he emailed me his suggestion for a solution, and of course it worked. Simple problem that I had not thought of. Loose connectors at the control board!!!
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
User avatar
cstroke
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 409
Joined: Thu May 24, 2012 7:45 pm

Re: thoughts on my new LDR table

Post by cstroke »

I've talked to Dan when I was getting ready to get a new table. I ended up going with what I knew.
I talked to him several times and he gave me a good feeling that if I got a table from him that he would be there for me. If I end up looking for another table I'll certainly be talking to him.
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
pitbumpers
1.5 Star Member
1.5 Star Member
Posts: 39
Joined: Sun May 14, 2017 7:59 pm

Re: thoughts on my new LDR table

Post by pitbumpers »

Thank god, I thought I was the only one with dumb questions for Dan...lol
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8580
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: thoughts on my new LDR table

Post by adbuch »

:Like :Like :Like :Like :Like
Post Reply

Return to “Various Manufacturers Forum”