thoughts on my new LDR table

LDR plasma table discussion forum
Post Reply
58er
Posts: 14
Joined: Sun Apr 21, 2019 7:29 am

thoughts on my new LDR table

Post by 58er » Sun Jul 21, 2019 7:00 pm

Bought a new 4x4 table from Dan at LDR, have had it for about a month now and slowly getting the hang of it,
few things , first the quality. absolutely top notch, I looked around for quite a bit before i decided on LDR, I would recommend to anyone, very solid and well built .
second , the support. Dan knows these machines inside and out. period. he has had the answer to every stupid question and situation I've gotten myself into. --also very patient and responsive.....
Looking forward to many years of cutting
thanks Dan.

plasmanewbie
Elite Contributing Member
Elite Contributing Member
Posts: 830
Joined: Thu Jul 24, 2008 11:15 am

Re: thoughts on my new LDR table

Post by plasmanewbie » Mon Jul 22, 2019 8:48 am

:Like

sr guy
Posts: 55
Joined: Tue Jul 07, 2015 8:10 am

Re: thoughts on my new LDR table

Post by sr guy » Mon Aug 19, 2019 3:19 pm

Dan is an awesome Guy! Great to work with.
LDR 4x8 w scribe :D
Miller syncrowave 250
Hobart ironman 230
Baliegh tn 250
Bantam 12 ton 48"
JD2 model 32

User avatar
ColoradoWayne
Elite Contributing Member
Elite Contributing Member
Posts: 230
Joined: Fri Dec 06, 2013 4:48 pm
Location: Colorado Springs, CO

Re: thoughts on my new LDR table

Post by ColoradoWayne » Mon Sep 02, 2019 9:39 am

I've had my LDR table for over 5 years with the same experience. Still running strong!
Wayne
LDR Motion Systems 4 x 4 water table
Hypertherm Powermax 65

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1459
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: thoughts on my new LDR table

Post by tnbndr » Thu Sep 05, 2019 8:14 am

I have had my LDR 4x8 for over 6 years with nothing but minor, mostly operator errors. I just had an issue with the gantry twisting, sent Dan an email with a video. Within an hour he emailed me his suggestion for a solution, and of course it worked. Simple problem that I had not thought of. Loose connectors at the control board!!!
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 215
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

Post Reply

Return to “LDR Motion Systems”

Easyscriber engrave attachment for Hypertherm plasma cutters.