Star Lab Gantry Kit

Star-Lab plasma table discussion forum
Post Reply
Posts: 75
Joined: Sun May 31, 2020 11:46 am

Star Lab Gantry Kit

Post by EverydayDiesel » Sun Aug 30, 2020 7:05 pm


I have seen many people talk about a gantry kit made by star lab. Is this still offered? Where can I buy one? says no products offered under 'gantry kits'

Thanks in advance

Posts: 71
Joined: Wed May 13, 2020 4:23 pm

Re: Star Lab Gantry Kit

Post by ScottRa » Sun Aug 30, 2020 9:48 pm

I’m not aware of kits now though it may be possible that don’t list them. They started out selling gantry and electronics packages under their Bulltear Industries banner and somewhere around the early 2010’s went to the Starlab name as far as I recall. Matt from Bulltear posts on this thread in case you weren’t aware.


BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 547
Joined: Thu May 12, 2011 4:28 pm

Re: Star Lab Gantry Kit

Post by BTA Plasma » Fri Sep 11, 2020 4:56 pm

We did offer the Star Lab machine and machines prior as a gantry kit. What we found is the gantry kits do not have a proper level of positive customer experience and the support level was much too high as the customer must integrate precision rails into their own frame and also integrate and isolate electronics. We had a 99% success rate with our gantry customers however our focus has been on complete units for the last 4+ years which give the customer a much better experience. We are Bulltear Industries inc. and the Star Lab brand is our brand of plasma table. We are in 114 stores however the gantry kits are a thing of the past. I encourage you to look at our turnkey units as a solution. We ship those all over the world.

Post Reply

Return to “Star-Lab”

Industry Pros use FastCut CNC