Torch plundge
-
Stark94
- 1/2 Star Member
- Posts: 1
- Joined: Tue May 25, 2021 8:45 am
Torch plundge
Goodday can anyone please help. I have a cnc plasma running on mach3 and sheetcam with a proma sd thc. My problem is at the end of cuts my torch plunges into my 16mm plate and when it moves to the next cut start it pushes into the plate and burns my tips. Any and all advice would be deeply appreciated. Thanks in advance
-
acourtjester
- 6 Star Elite Contributing Member
- Posts: 7781
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Torch plundge
When you use the keyboard keys (page up and page down) does the torch move in the correct direction? The Proma SD has had many problems and it could be transfering the Z drive at the end of the cut to soon. Also there is a box to tell SheetCam to over cut at the end maybe you need to add cutting time with it.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
