It is currently Thu Oct 18, 2018 10:54 pm

 

Actual Table Measurements

Share and learn with other DIY members who have built their own plasma tables and accessories.
Charles Shaw
Posts: 4
Joined: Wed Jul 11, 2018 4:34 pm

Actual Table Measurements

Postby Charles Shaw » Mon Jul 30, 2018 4:34 pm

Hey everyone,

I know I've asked a few questions already but I'm really new at this. I assembled my 2' x 2' z torch over the weekend to get an idea of the actual size and have a couple of questions about the larger sizes.

1) To make a table that will be able to cut up to a 5' x 10' piece of metal does it have to be over sized to a 6' x 11' ?

2) on this little "table" there are 2 braces on the bottom that keep it together and square, does plasmacam make them for the larger machine and are they available to buy separately ?

I had already ordered longer rails and gantries but I think I didn't get the correct length on the gantry and the gantry shaft.
I've tried to call plasmacam and talk to someone there to get the right items needed ordered but I just got the response ( I don't know ) so your help would really be appreciated PLEASE !!!

plasmanewbie
Elite Contributing Member
Elite Contributing Member
Posts: 403
Joined: Thu Jul 24, 2008 11:15 am

Re: Actual Table Measurements

Postby plasmanewbie » Tue Jul 31, 2018 9:28 am

For sure the physical dimensions of the table will need to be larger than the sheet size you wish to cut. As for those bottom braces I am sure you could buy them and have them shipped but I would make them myself.

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1413
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Actual Table Measurements

Postby tnbndr » Thu Aug 02, 2018 9:01 am

but I just got the response ( I don't know )

Wait!!! They are selling you table and parts but can't help you out, WTF.
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com


Return to “DIY Plasma Table & Accessory Discussion Forum”

Who is online

Users browsing this forum: No registered users and 6 guests

Easyscriber engrave attachment for Hypertherm torch's