Easyscriber sheetcam settings Help...

All topics related specifically to the EasyScriber drag style scribe & engraving tool.
Post Reply
Axlworks
Posts: 6
Joined: Sat Apr 07, 2018 12:11 am

Easyscriber sheetcam settings Help...

Post by Axlworks » Tue May 21, 2019 5:07 pm

My scriber is dragging from letter to letter. How do I get my Z to come up in between scribes? Thanks guys!

I’m using sheetcam / Mach 3 and a touch off plasma system.

User avatar
WyoGreen
Elite Contributing Member
Elite Contributing Member
Posts: 760
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: easyscriber sheetcam settings Help...

Post by WyoGreen » Tue May 21, 2019 8:56 pm

Check your setting in Sheetcam--> Job Options--> Rapid clearance. You may need to increase this to a larger value, especially if your scribe is spring loaded.

Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser

EasyScriber
Posts: 34
Joined: Thu Dec 13, 2018 2:13 pm

Re: Easyscriber sheetcam settings Help...

Post by EasyScriber » Thu Sep 12, 2019 2:49 pm

Axlworks wrote:
Tue May 21, 2019 5:07 pm
My scriber is dragging from letter to letter. How do I get my Z to come up in between scribes? Thanks guys!

I’m using sheetcam / Mach 3 and a touch off plasma system.
Check out this topic viewtopic.php?f=172&t=28847 and post any questions :Like

Post Reply

Return to “**NEW** EasyScriber Drag Style Scriber for Hypertherm”

Easyscriber engrave attachment for Hypertherm plasma cutters.