Plasma exhaust fan kit

$ 599.00

FREE Shipping in Continental USA & Canada
Fast, Secure Payment With Fast, Secure Payment With PayPal
PlasmaSpider Member: Brian D
"Got it all finished today. Love it!!"
This kit can be adapted to any plasma table easily. Enclosing the sides of your table and mounting the adapter flange to one end allows you to attach the 12" flexible duct to the table. Install the fan at an exterior wall and attach the flexible duct. The fan is furnished with a standard 115v grounded plug that we recommend you plug into a switched outlet for convenient fan operation. A screened outlet cover or trap door can be fabricated to suit your shop and the installation is complete. This kit works well on plasma tables up to 5x10 feet when cutting deck is completely covered. When cutting partial sheets cover the open area of the cutting deck with additional partial sheets for best performance.
    Kit Includes:
  • - Our powerful and compact 12" 2000cfm exhaust fan
  • - Adapter flange to connect duct to your table
  • - 25' of flexible 12" diameter duct
  • - 12" diameter duct clamps
  • - 5' power cord and plug
  • - Fan mounting base
12" Exhaust Fan
Flow Rate2000 cfm @ 0wg
Fan Inlet/Outlet Diameter12"
Fan Overall Length12.125"
Fan Operating RPM3375 rpm
Input Power115v 1ph 60Hz
Amperage4.1 amps @ 115vac 60Hz
Duct Length25' flexible
Adapter Flange OD14"
Q: Is this large enough for my 4x8 or 5x10 plasma cutting table?
A: Yes, enclose the sides of your table, cover open areas of your cutting deck and this fan will create a strong draw and effectively evacuate the smoke and fumes.

Q: How does the 12" flexible duct connect to the table?
A: The adapter flange can be welded or bolted to the side of the cutting table and the duct is clamped onto the adapter flange with the included duct clamps.

Q: Should the fan be installed at the inlet or outlet end of the duct?
A: The fan should be installed at the outlet end of the duct.