I have a customer that wants his name cut with a font called IRON WOOD.
Can some one with this font convert his company name for me.
The name is STEEL WHEELS.
Any help will be appreciated.
Zeke
Need help with Font
-
- 1/2 Star Member
- Posts: 6
- Joined: Tue Feb 02, 2010 9:01 pm
Re: Need help with Font
HOPE THIS WORKS
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 78
- Joined: Sun Jul 26, 2009 11:42 pm
Re: Need help with Font
Thanks shoebang, This should do it.
Zeke
Zeke
-
- 3 Star Elite Contributing Member
- Posts: 309
- Joined: Sat Jan 01, 2011 1:47 pm
- Location: Platteville, CO
Re: Need help with Font
Thanks!
-
- 2 Star Member
- Posts: 78
- Joined: Sun Jul 26, 2009 11:42 pm
Re: Need help with Font
Thanks for the Iron Wood Font Shoebang.
I was wondering if I am doing something wrong when I down loaded it.
I am having trouble with the letters not cutting out correctly. The "E" and "S" do not cut out clean. The tips at the end of the letters adjacent to the main body of the letter are burning into the body of the the letter and the center leg of the "E" is burned out.
Do you have any suggestion for me to try to improve my buring?
Thanks
Zeke
I was wondering if I am doing something wrong when I down loaded it.
I am having trouble with the letters not cutting out correctly. The "E" and "S" do not cut out clean. The tips at the end of the letters adjacent to the main body of the letter are burning into the body of the the letter and the center leg of the "E" is burned out.
Do you have any suggestion for me to try to improve my buring?
Thanks
Zeke