HMMM....
When editing a plt file in cut and command, typically I use the join option which greatly reduces the number of objects. For example if I have 900 objects (lines) it would reduce the file to about 130 individual objects. I used coral to design the sheet and grouped them within corel but when they are imported into cut and command the grouping is not recognized. Is there something I am missing? The file that I am currently trying to join freezes cut and command.
Nevermind....Justin from Tracker took care of things....I am not sure how they do it!!! Looks like it was an operator error.
Thank you for the quick response and the help Tracker.
Pete
cut and command unresponsive
-
- 1/2 Star Member
- Posts: 3
- Joined: Mon May 28, 2012 1:20 pm
- Location: Dashwood
- Contact:
- Team Tracker
- 2.5 Star Member
- Posts: 104
- Joined: Thu Nov 18, 2010 7:36 pm
Re: cut and command unresponsive
Hey Pete, glad to see your problem resolved so quickly. He always seems to beat me to the solution.
Regards
Reid T
Tracker CNC
Regards
Reid T
Tracker CNC
1-800-590-7804
-
- 1/2 Star Member
- Posts: 2
- Joined: Sat Mar 21, 2015 12:41 pm
Re: cut and command unresponsive
Could you share the help that fixed your issue, I very often have the same issue, Corel shows the nodes connected, then when I open it in command and cut, I have all these individual lines.