heres a bottle opener i made
Bottle Opener
-
- 1.5 Star Member
- Posts: 33
- Joined: Sun Apr 01, 2012 12:50 am
Bottle Opener
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Member
- Posts: 470
- Joined: Thu Mar 03, 2011 12:06 am
- Location: Maine
Re: Bottle Opener
Thanks for sharing!
- Chopper John
- 3 Star Elite Contributing Member
- Posts: 392
- Joined: Mon Aug 24, 2009 10:22 pm
- Location: Crystal Lake, IL
- Contact:
Re: Bottle Opener
Thanks for posting, I like it.
Chopper John
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1709
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: Bottle Opener
hmmmm was not able to open the file, must be my sofeware
-
- 1 Star Member
- Posts: 14
- Joined: Wed Oct 10, 2012 8:31 pm
Re: Bottle Opener
Thanks for sharing
-
- 1.5 Star Member
- Posts: 46
- Joined: Tue Apr 24, 2012 5:17 pm
Re: Bottle Opener
What gauge metal are you guys using?
Texas Mark
Texas Mark
-
- 1.5 Star Member
- Posts: 33
- Joined: Sun Apr 01, 2012 12:50 am
Re: Bottle Opener
i used 11 gauge then ground a taper on the opening a bit it makes it work a lot better
-
- 1.5 Star Member
- Posts: 33
- Joined: Sun Apr 01, 2012 12:50 am
Re: Bottle Opener
here is another one i made. cut these out of some 3/16
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- billyeagley
- 3 Star Elite Contributing Member
- Posts: 359
- Joined: Tue Jun 05, 2012 7:11 pm
Re: Bottle Opener
I have some friends that can appreciate that.
Thanks for sharing that!
Thanks for sharing that!
PlasmaCAM 5x10 (Samson) - DesignEdge - Hypertherm Powermax 65