Im currently building a CNC Plasma and doing the electrics first
though im struggling the Main offline controller as all these Chinese ones are all saying 2 x Axis
i know the Z Axis is driven by a dedicated 24vDC Power and output
so the 2 x AXIS Controllers that are all over the internet
I was wanting to use a 3 x Axis system so 1: X Axis 2: Y Axis 3: Y Axis Slave making a 3 x Axis system? The Z is controlled by its own dedicated output
What am i missing? why do they all say 2 x Axis controllers online?> i need 3 as i wanted to have a Y and a Y Slave to power the table
Attached is the parts i already have and will build the table after the electrics are all done and tested!
