Two Feet Only

[SegoMan DeSigns]

Here you go, the feet & toenails were created in CorelDraw 16 but saved in the CMX format so all versions of CorelDraw could open the file. I used vinyl for the toenails, Let me know if they are any problems or questions out there:

Two Feet.cmx

Two Feet.dxf

Disclaimer: Not responsible for projects walking off..

[acourtjester]

Looking at the artistic flare you use on your table, it looks like you had great fun in design and construction of your table. The 3 "F"s, form, function and Fun, "party on dude".

[plasmanewbie]

Love looking at the stuff you build, this is cool. Thanks for sharing SegoMan.

[SegoMan DeSigns]

Looking at the artistic flare you use on your table, it looks like you had great fun in design and construction of your table. The 3 "F"s, form, function and Fun, "party on dude".

Tom,

Not only do I believe that you should go big or go home but you should also have fun doing it. All of the wingdings and artwork that I put on PELE’ has created orders when people see them


.

Love looking at the stuff you build, this is cool. Thanks for sharing SegoMan.

Your entirely welcome!

[SegoMan DeSigns]

I cut the feet out of 1/2" plate and welded a short section of pipe on them for the adjustment bolt to go into. The pipe pocket has a washer made of 1/4" UHMW plastic in them for ease of turning on the bolt. The legs were constructed of 2-1/2" x 1/4" square tubing, 3/4" HR base plate to weld the nut too and 1/4" HR for the gussets. The bolts used were well head bolts (oil field trash here ) If you zoom in on the first photo you will see a grease zerk for lube.

Feet_4.jpg

Feet_3.jpg

[acourtjester]

Well if you don't leave Pele to your grand kids it will show up in an Art Museum's Industrial machine section.

[SegoMan DeSigns]

Well if you don't leave Pele to your grand kids it will show up in an Art Museum's Industrial machine section.

Tom,

That would be quite a feat to get all the feet there..