Free "O" rings

[acourtjester]

I have a bunch of the "O" rings that have be talked about for the Hypertherm torches. I will mail a few to those the ask for them in the Lower US.

[djreiswig]

Are these the ones that fit the Duramax torches, or are they the extra one that one of the members added to his torch to get better cuts?

[acourtjester]

Both one for internal to the nozzle, one for the internal torch cable connection to the plasma machine. and the last for the the adapter assembly mates to the torch body, ( better cut one).

[plasmanewbie]

Mighty kind of you Tom

[acourtjester]

Happy to help I cannot use 100 by myself

[adbuch]

That's very generous of you Tom! I keep a few spares on hand, but for those who don't yours is a great offer. I hope some of the members take you up on it. Thanks!!

David

[adbuch]

Both one for internal to the nozzle, one for the internal torch cable connection to the plasma machine. and the last for the the adapter assembly mates to the torch body, ( better cut one).

Tom - does that last one apply only to the Duramax machine torches or does it work with the hand torches as well? I believe the cap for the Duramax torch is the same for either one, but I have only heard discussion about cutting improvements when the o-ring is added to the machine torches.

David

[acourtjester]

I have not checked the hand torch but the first 2 would seem to me to apply for either torch. As the receiver at the front of the plasma unit and the internal adapter are the same.

[MALTFabrication]

I'd love to have a few if you don't mind!

[TJS]

Thanks Tom. This is so great. I will take you up on that offer.

[acourtjester]

Have fun they in the mail box.

[Smith33]

I can't remember where the thread to the external o-ring improvement is, can someone point me there? I know I just was looking at it the other day

[tinspark]

I can't remember where the thread to the external o-ring improvement is, can someone point me there? I know I just was looking at it the other day

Is this the thread that you are looking for?
https://www.plasmaspider.com/viewtopic. ... ilit=oring

[martyy]

anyone know if these would fit the T45M torch on the Hypertherm 45 Non XP?

[acourtjester]

to answer your question, no the PM45 hand and machine torch have a different part number for the "O" ring. Show below manual pages from Hypertherm PM 45 and PM 65 Duramax machine torch.