Garden Planting Stake DXF Designs

[dbrub2]

Having benefited from the numerous cut files made available on this forum I have been wanting to return the favor and contribute but until recently just had not taken the time. Here is another that I hope others will find useful and maybe add to the list of plants & veggies

Planting Stake Master v2.svg

[plasmanewbie]

Thanks dbrub2, these are the nicest garden stakes I think I have ever seen posted! My mom will love these

[John Self]

do you have them in a DXF?

[c_rossman]

DXF FIle

Garden Stakes.dxf

[adbuch]

Nice work dbrub2! Very well done. And kudos to c_rossman for a great nesting job. These will fit one exactly 1/2 of a 4x4 sheet.
David

Nice Nesting Job.jpg

[J-SIG]

Nice Job! My sister will like them!

Jeff

[shaferc63]

thank you great veggie choices

[cuttinparts]

Love these! Thank you!

[martyy]

what gauge material would be suitable for these stakes?

[adbuch]

what gauge material would be suitable for these stakes?

I think 16 ga or 14 ga would work well for these.
David

[martyy]

Thank you for the reply. I have only had my table going since last Friday, so learning a ton. Printer a gnome from this site on some 16ga and it seemed bit flimsy. Should be fine in good garden soil but maybe not so in hard packed outside of garden depending on environment. I might try these on some 14ga.

[martyy]

How does one go about matching the font if they want to change one of veggie names? Say change cucumber to Kohlrabi.

[adbuch]

How does one go about matching the font if they want to change one of veggie names? Say change cucumber to Kohlrabi.

Marty - you could take a look at dafont.com or one of the other free font sites to see if you can find a font that matches up. Then download and install it into your computer for use with Inkscape or whichever cad program you are using. Here is one with the wording you requested, but a different font. Perhaps you can use it as is.
David

kohlrabi.dxf image.jpg

kohlrabi.dxf

[martyy]

Thanks again David. That looks like a fairly close match . I guess I could also replace all of the text with new font and then it would match if I really want them to be the same. I do use Inkscape and have a long way to go in learning it. Thankfully there are lots of great howto videos and this forum. I will get a silhouette of a kohlarabi and try a cut later this week.

[adbuch]

Thanks again David. That looks like a fairly close match . I guess I could also replace all of the text with new font and then it would match if I really want them to be the same. I do use Inkscape and have a long way to go in learning it. Thankfully there are lots of great howto videos and this forum. I will get a silhouette of a kohlarabi and try a cut later this week.

[Dirtmotor]

Thanks am cutting these for gifts .

[martyy]

Did not cut the Kolhrabi yet, but did the others. Turned out great. Have not decided if I will paint them or leave them shined up with the clear coat on them. I cut them with 14ga. Heavy enough to use as a weapon!

20220916_091340 (Phone).jpg

[Dirtmotor]

Is it better to leave these raw and let them rust or paint ?

[plasmanewbie]

Did not cut the Kolhrabi yet, but did the others. Turned out great. Have not decided if I will paint them or leave them shined up with the clear coat on them. I cut them with 14ga. Heavy enough to use as a weapon!

Nice job, looks like they cut out very well! Thanks for sharing your pic

[plasmanewbie]

Is it better to leave these raw and let them rust or paint ?

I personally would prefer to paint them a brighter color so they stand out but I don't think it matters.

[martyy]

Is it better to leave these raw and let them rust or paint ?

I personally would prefer to paint them a brighter color so they stand out but I don't think it matters.

Other than "GREEN" as I was instructed by the wife!

[martyy]

Had a request for "Weeds" which I thought was quite fitting for many gardens (mine for sure) The SVG letters could use a little clean-up but thought it turned out ok. It cut great just like the originals and I think it is a good addition to the original collection. Long live the Dandelion!

Planting Stake-WeedsOnly.svg

[adbuch]

Nice work Marty! You could use "Path, Simplify" on the text to reduce node count, but I expect it cut very well as is.
Thanks for sharing your design.
David

[Foxmartin1]

had a request for strawberry. figured id share

strawberry.svg

[AREA]

Very cool font in that Strawberry stake. What font is that? Looks great, thanks for posting.