Hello All

CNC Plasma Cutters are amazing and there is always plenty of knowledge to share and discuss. Use the CNC plasma cutters general forum for this purpose.

Hello All

Postby metalsmith » Sun Sep 07, 2008 4:11 am

I just found this forum and wanted to say hi!
Metal Smith
metalsmith
 
Posts: 2
Joined: Sun Sep 07, 2008 3:14 am
Location: Dawsonville, Ga

Re: Hello All

Postby admin » Mon Sep 08, 2008 8:05 am

Welcome metalsmith I hope you find this forum to be helpful.
User avatar
admin
Site Admin
 
Posts: 304
Joined: Thu Jul 03, 2008 4:12 pm
Location: Out In The Shop

Re: Hello All

Postby Torchmate » Thu Sep 18, 2008 2:56 pm

HELLO ALL I work at a gate manufacture part time I run the cnc plasma machine its a torchmate 5x10
table here are the websites to see some of my work all work is custom high end gates some costing over 100k
I will post some dxf files for you to look at later and my table is vented with a fan sucking out fumes out of the
plasma room

http://www.hilerironworks.com/

http://www.gatesandsilhouettes.com/SILH ... INDEX.html
Torchmate
 
Posts: 24
Joined: Thu Sep 18, 2008 2:13 pm

Re: Hello All

Postby admin » Thu Sep 18, 2008 6:21 pm

Welcome Torchmate

Glad to have you with us. I have looked at the 2 websites you listed and am very impressed with your gates and artwork. Your experience will be a huge asset to this forum.

We have a couple members who have shared some of their art files and I look forward to seeing some files that you would like to share.

Thanks again, and come back often.

Admin :mrgreen:
User avatar
admin
Site Admin
 
Posts: 304
Joined: Thu Jul 03, 2008 4:12 pm
Location: Out In The Shop


Return to CNC Plasma Cutters General Forum

Who is online

Users browsing this forum: dustywill, Google [Bot] and 3 guests

SHARE ON