Looking for some help on this one
need help with this one
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: need help with this one
Do not try to cut this as is. It is a start though. You'll have to finish the file. All the lines are there. They need to be joined and all that. You should be able to make it work from here.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1/2 Star Member
- Posts: 5
- Joined: Wed Sep 30, 2009 10:53 am
Re: need help with this one
Sorry new here what is SVG? file i usually use DXF
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7784
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: need help with this one
Scalable Vector Graphics
Art work seems to work better in that format, they load into sheetcam the same way as DXF but use the ration 1:1 if the drawing is the size you want to cut.
Art work seems to work better in that format, they load into sheetcam the same way as DXF but use the ration 1:1 if the drawing is the size you want to cut.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: need help with this one
That file is not ready for SheetCam though. It's just a start. Import it into your drawing program and finish it. I got you 3/4 of the way there.
-
- 1/2 Star Member
- Posts: 5
- Joined: Wed Sep 30, 2009 10:53 am
Re: need help with this one
I would like to cut 2 feet square but i would need DXF Thanks