Thanks for the file! I modified it a little adding a sun and moon and adjusting the glomon for my latitude. I need to make it a bit more ornate possibly if I cut more. Haven’t cut legs yet, need more steel.
I’ve been doing some test cuts of files I found here trying to learn, as witnessed by the bottle openers on the table too.
Sundial
-
- 2 Star Member
- Posts: 79
- Joined: Sun Jan 13, 2019 3:36 pm
Re: Sundial
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 60
- Joined: Tue Feb 19, 2019 6:09 pm
Re: Sundial
Here is a picture of my sundial project. Thanks to the one who posted the drawings. My project is cut from 10ga. steel.
I had to change the angle of the gnomon to match my local latitude.
I also attached some stake pockets and cut some stakes to fit.
Now I just have to wait for a nice day to paint it all.
I had to change the angle of the gnomon to match my local latitude.
I also attached some stake pockets and cut some stakes to fit.
Now I just have to wait for a nice day to paint it all.
-
- 2 Star Member
- Posts: 79
- Joined: Sun Jan 13, 2019 3:36 pm
Re: Sundial
that looks great 4Eleven!
- ETCWeld
- 3 Star Member
- Posts: 257
- Joined: Sat Dec 16, 2017 10:45 pm
Re: Sundial
Thank you, It was an experience... but i was/am proud of him for pulling it off. No matter how stressful it got, He's an Eagle now, and that'll last forever.
-
- 1 Star Member
- Posts: 21
- Joined: Mon Mar 04, 2019 8:24 pm
Re: Sundial
thanks for the share