Vise Grips Rack

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
MetalTorcher
3 Star Member
3 Star Member
Posts: 450
Joined: Sun Sep 08, 2013 2:17 pm
Location: Manitoba

Re: Vise Grips Rack

Post by MetalTorcher »

CNCCAJUN wrote:Nice file, but I just realized the "G" in GRIPS is not all there . . .

Thanks,
Steve
File looks good to me, not sure what you mean.
Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
d bushey
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 91
Joined: Fri Oct 07, 2011 10:57 am
Location: Eastern Wa

Re: Vise Grips Rack

Post by d bushey »

Definitely saving that. Thanks
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: Vise Grips Rack

Post by CNCCAJUN »

When I open in AutoCAD the bottom of the "G" is missing in GRIPS :?

When I open with DraftSight everything is just fine . . . :? :? :? :? :?

Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Largemouthlou
4 Star Member
4 Star Member
Posts: 1402
Joined: Mon Aug 30, 2010 5:56 am
Location: Palm Bch Gardens Fl
Contact:

Re: Vise Grips Rack

Post by Largemouthlou »

Nice original file, love the hanging one as well!! Very nice thanks,,

Steve, the G was all there when I opened with corel..
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
MGardner
2 Star Member
2 Star Member
Posts: 72
Joined: Wed Feb 05, 2014 5:17 pm
Location: Dallas Texas

Re: Vise Grips Rack

Post by MGardner »

This will be put to GREAT use.
THANK YOU very much
Mike
agarwelding
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Mon May 12, 2014 8:35 am

Re: Vise Grips Rack

Post by agarwelding »

Thanks for sharing the file.
DezertBlingMoto
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 132
Joined: Sun Dec 08, 2013 3:53 pm

Re: Vise Grips Rack

Post by DezertBlingMoto »

thank you so much for the post of this tool rack . highly appreciated .Anyone happen to know the actual dimension's ? when I imported turned out to be 15X5". Anyone got anything different ? thxs in advance
User avatar
billyeagley
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 359
Joined: Tue Jun 05, 2012 7:11 pm

Re: Vise Grips Rack

Post by billyeagley »

Very practical file! Thanks!
PlasmaCAM 5x10 (Samson) - DesignEdge - Hypertherm Powermax 65
tch5182
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Fri Apr 25, 2014 6:54 pm

Re: Vise Grips Rack

Post by tch5182 »

Thanks! Maybe I will be able to find them when I need them now. I spend more time looking for vise grips and tape measures than I do working.
radnurse68
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Sat Dec 21, 2013 11:13 pm
Location: Hallsville, Tx
Contact:

Re: Vise Grips Rack

Post by radnurse68 »

Thanks!!!
Stephen W. Sparks RN,CRN
Creating Sparks Metal Worx
Arclight Dynamics Arc Pro 12000 5X10
Linux, Sheetcam, Inkscape, Solid Edge
Hypertherm 85
MIllermatic 175
AHP Alphatig 200X
Kool Koat 3.0 DPW

"Ridin around having a big time!"
crazy59860
2.5 Star Member
2.5 Star Member
Posts: 117
Joined: Thu Feb 23, 2012 10:06 pm
Location: Montana

Re: Vise Grips Rack

Post by crazy59860 »

very nice.........will have to show hubby
Toni
User avatar
HammerDownJustin
3.5 Star Member
3.5 Star Member
Posts: 613
Joined: Mon Mar 04, 2013 10:41 pm
Location: Paradise,Tx

Re: Vise Grips Rack

Post by HammerDownJustin »

Wish I had that many pairs of vice grips to justify making this..lol
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
chattacuda
1.5 Star Elite Contributing Member
1.5 Star Elite Contributing Member
Posts: 47
Joined: Fri Mar 15, 2013 11:33 am

Re: Vise Grips Rack

Post by chattacuda »

Thanks for the file. What a great idea! I made two of them, then slightly modified the file and made a couple of hangers for my most often used air tools out of 11 and 14 ga. Worked great. Thanks again
chattacuda from Dayton, Tennessee
CandCNC electronics, Precision Plasma V rail gantry, homemade 4'x8' water table, Sharpe Air Dryer
Hyperthem 45XP, CommandCNC, Sheetcam, Corel Draw
karltatt2
1 Star Member
1 Star Member
Posts: 21
Joined: Mon Oct 07, 2013 12:13 pm
Location: Nottingham,UK

Re: Vise Grips Rack

Post by karltatt2 »

[quote="mdoffroad"]15 Downloads and not one thank you.......whats wrong with some of you people!

great idea m8ty thank you for sharing
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: Vise Grips Rack

Post by CNCCAJUN »

Thank you again . . . . . this is the first file I have cut using SheetCAM . . . SigmaNEST is being put rest . . .

Steve
Last edited by CNCCAJUN on Wed Oct 08, 2014 8:20 pm, edited 1 time in total.
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Thumper
2.5 Star Member
2.5 Star Member
Posts: 110
Joined: Tue Jan 29, 2013 8:22 pm

Re: Vise Grips Rack

Post by Thumper »

Thanks for the file,,,
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: Vise Grips Rack

Post by CNCCAJUN »

Redlunn wrote:Yeah, my first post!

Here is a simple rack for holding various vise grips. I don't have any type of brake so I cut reliefs at the bend points. I plan to weld it underneath my welding table.

Redlunn

Image
Image
Hello Redlunn;

The slender rectangular boxes are relief points to make bending possible without a brake, if using a brake can I assume the center of those boxes would be the bend lines?

Thanks,
Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
ron
1.5 Star Member
1.5 Star Member
Posts: 39
Joined: Wed Jul 29, 2009 1:21 pm

Re: Vise Grips Rack

Post by ron »

GREAT IDEA AND I THINK EVERYONE WILL APPRECIATE THE RACK. THANKS
Jeff M
2 Star Member
2 Star Member
Posts: 54
Joined: Fri Oct 21, 2011 9:16 pm

Re: Vise Grips Rack

Post by Jeff M »

cool,
thanks for the post.

Jeff M
metalworxfabricators
1.5 Star Member
1.5 Star Member
Posts: 39
Joined: Thu Jan 03, 2013 10:32 am
Location: Waxahachie, Texas

Re: Vise Grips Rack

Post by metalworxfabricators »

Super nice work. You did good.

Thank You,
Metalworx Fabriicators
Metalworx Fabricators
ArcLight Dynamics
Hypertherm Powermax 45
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: Vise Grips Rack

Post by CNCCAJUN »

Great file, but I did I make some changes so they could be used by more people . . . :D :D :D

I added 2" height to the back & (4) 1/4" holes . . .

Now they can be mounted to a wall, pegboard, etc . . . and still function as designed . . .

I eliminated the relief slots and had them bent on a large brake.

Also thanks to your idea I think can design a clamp rack for small Bessy Clamps for the wood shop . . .

Thanks for posting . . . .

Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
AIRFLOWKID
2.5 Star Member
2.5 Star Member
Posts: 229
Joined: Sun Sep 27, 2009 9:48 pm

Re: Vise Grips Rack

Post by AIRFLOWKID »

Thanks so much!!!!

Tim :ugeek:
kkroger
2.5 Star Member
2.5 Star Member
Posts: 229
Joined: Sat Apr 26, 2014 7:56 pm

Re: Vise Grips Rack

Post by kkroger »

Designed something very similar for Air Tools, then discovered that someone is already selling something similar.
I put Keyholes in for hanging larger circle with a slot above.
kkroger
2.5 Star Member
2.5 Star Member
Posts: 229
Joined: Sat Apr 26, 2014 7:56 pm

Re: Vise Grips Rack

Post by kkroger »

Here is the one I designed. I did a Vise Grip Rack so the tools hang from the adjustment screw...
I use 18Ga and bend them with an HF Brake. Look sellable at swap meets.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Corfabrication
2.5 Star Member
2.5 Star Member
Posts: 148
Joined: Mon Nov 03, 2014 2:04 pm
Location: Racine Wi
Contact:

Re: Vise Grips Rack

Post by Corfabrication »

HammerDownJustin wrote:Wish I had that many pairs of vice grips to justify making this..lol
I think this gives a reason to buy more vise grips.
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”