need help!
-
- 1/2 Star Member
- Posts: 7
- Joined: Wed Oct 02, 2013 10:33 pm
need help!
hi all, i am having problems with a file that i am trying to burn... i have a 60x120 Pegasus Kaliburn PROLINE 2200. any help would be great!
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7792
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: need help!
any info will help us to.
What kind of problem.
first off I downloaded it and it will not display in sheetcam!!!
What kind of problem.
first off I downloaded it and it will not display in sheetcam!!!
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1/2 Star Member
- Posts: 7
- Joined: Wed Oct 02, 2013 10:33 pm
Re: need help!
Im not happy with the "dots" on the edges within the drop out areas.
-
- 2.5 Star Member
- Posts: 212
- Joined: Sun Dec 01, 2013 1:29 pm
Re: need help!
There is nothing there when I try to open it.
Precision Plama LLC SDB 5x10
CandCNC
Hypertherm 65
Mach3
SheetCAM
the GIMP
inkscape
QCAD
https://www.facebook.com/burtonskustom
CandCNC
Hypertherm 65
Mach3
SheetCAM
the GIMP
inkscape
QCAD
https://www.facebook.com/burtonskustom
-
- 1/2 Star Member
- Posts: 7
- Joined: Wed Oct 02, 2013 10:33 pm
Re: need help!
It is a cad dxf. I created it with draftsite.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7792
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: need help!
If you are talking about the dots you need to change to inside offsets in SheetCam you are cutting on the line so there is no lead in to put the pierce in the waste.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2.5 Star Member
- Posts: 181
- Joined: Wed Sep 23, 2009 8:54 pm
- Location: Midcoast Maine
Re: need help!
Try some different lead in and lead out types and try some different start locations location. These may all be modified in Sheetcam. You should be able to arrive at a good setup.