Fire Pit/Cooking Goodies Sharing Thread

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
Thumper
2.5 Star Member
2.5 Star Member
Posts: 110
Joined: Tue Jan 29, 2013 8:22 pm

Fire Pit/Cooking Goodies Sharing Thread

Post by Thumper »

I'm just tossing this out their to see if their is any interest in having one thread with everyone's fire pit files their willing to share or have previously uploaded on a separate posting. Just thought it would be kinda cool to have one thread with all of the pits and cooking goodies in it since cooler weather is right around the corner. Here are a few to start it off, lets see if anyone else is willing to play :D
Image
jalapenotexas.dxf
Octagon Slanted Firepit.dxf
36 hex pit.dxf
48-pit.dxf
36-pit.dxf
24-pit.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by Larry83301 »

Thanks for the file! Hope some add to your thread.

Larry
Charlieboy
2 Star Member
2 Star Member
Posts: 82
Joined: Wed Aug 07, 2013 12:42 pm
Location: Huntsville, Texas

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by Charlieboy »

Highly appreciated!! :D
kevin53
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 179
Joined: Sat Oct 23, 2010 5:22 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by kevin53 »

Here is one that I donated fund raiser a classic car guy injured at the race track. DUMMIE ME , I forgot to take a picture of it.
Image
36 IN CHEVY FIRE PIT.pcm
CHEVY COUNTRY FIREPIT GTATE.pcm

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

kevin53
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 179
Joined: Sat Oct 23, 2010 5:22 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by kevin53 »

For those of you that cannot use PCM
CHEVY COUNTRY FIREPIT GTATE.dxf
36 IN CHEVY FIRE PIT.zip

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by Larry83301 »

Very nice! Love the use of the cars on all eight panels. :D :D :D

Larry
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by CNCCAJUN »

Thank you . . .

Steve :D
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
cbassjr
3 Star Member
3 Star Member
Posts: 307
Joined: Fri Dec 21, 2012 5:21 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by cbassjr »

Thanks always looking for new fire pits and ideas. Like the thread idea.
User avatar
Oldsarge
3.5 Star Member
3.5 Star Member
Posts: 636
Joined: Tue Feb 22, 2011 10:12 am
Location: Lacey, WA

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by Oldsarge »

Thanks for the post... I love the idea of rolling up a bunch of files into one general heading like this.... I've somewhat organized my file structure on my thumb drives into broad categories like this and it really helps finding files, especially when you haven't used one in a while, and there's hundreds of files to wade through!

Oldsarge
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
hooked
2 Star Member
2 Star Member
Posts: 55
Joined: Wed Oct 17, 2012 12:37 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by hooked »

Thumper , thanks for the shares, i was resently ask for a small 24" pit that was heavy duty! thanks!! kyle
Thumper
2.5 Star Member
2.5 Star Member
Posts: 110
Joined: Tue Jan 29, 2013 8:22 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by Thumper »

cbassjr wrote:Thanks always looking for new fire pits and ideas. Like the thread idea.


Well add to it :D Im always looking for ideas to :lol:


245 Views and only a couple add's. Come on guys this is the sharing page, not the taking page. Add some new stuff or I'm going to start new threads every hour asking how to build a stick man file and if someone could build me a circle inside a box file in dfx by tomorrow for a customers brothers cousins volunteer nympho sex ed class held at the local adult book store to raise money for the blind pigmies in southern Vaginia Falls :D :lol:

In short add some stuff Allready Goobers
weldor2005
3 Star Member
3 Star Member
Posts: 354
Joined: Fri Mar 01, 2013 4:22 pm
Location: Southern Kansas City Area
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by weldor2005 »

I might as well post it here, as an FYI for those of us who like to burn things, I made a 36" out of 3/16" and I haven't had it for a year yet and I've warped the sides pretty good from the heat.
David Finch CWI

Plenty of welders
Plasmacam 4x4 with DHC2
PowerMax 45
Lots of other toys
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by tnbndr »

Here are a couple of rolled ring designs I've done over the years.
These are set up to cut from 5'x10' sheets and then just roll to diameter (~37") and weld the seam. You can adjust them however you like to fit your sheet size.
Image
Deer-Turkey Fire Ring.dxf
Sailing Fire Ring 14.dxf
Farm Fire Ring.dxf
Duck Landing Fire Ring.dxf
Bear Fire Ring 14.dxf
Coyote Fire Ring.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
scottlane
2.5 Star Member
2.5 Star Member
Posts: 101
Joined: Fri Aug 21, 2009 7:23 pm
Location: Texas

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by scottlane »

Thanks for the files. You guys make getting started on a project a little easier.

Thank you again for the great files.


:mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen:
aicomp
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 233
Joined: Wed Feb 02, 2011 5:15 pm
Location: Santa Anna Texas
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by aicomp »

Wow, This is a Great thread. I am designing some fire pits now and will share when I get them done.
Thanks for the greaat files.
Mike
http://www.PenningtonFab.com
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by acourtjester »

Thanks for the upload

have fun
Tom
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Thumper
2.5 Star Member
2.5 Star Member
Posts: 110
Joined: Tue Jan 29, 2013 8:22 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by Thumper »

You guys are very welcome for my files and I appreciate the others being shared as well.... If we can continue to make this thread roll with new files uploaded to it I will continue to share more of mine. I have lots of off the wall fire pits and cooking goodies. I honestly think its a healthy way to conduct ourselves in he form of sharing ideas and files. If you pick up something new you have never thought of then this thread was a success.
User avatar
Chopper John
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 392
Joined: Mon Aug 24, 2009 10:22 pm
Location: Des Plaines, IL
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by Chopper John »

Here is a grill top I did awhile back for a buddy to replace a rusted one on his Weber. I cut it from 3/16 stainless steel. Just tack weld the handles in the upright position. I reversed the logo so it would be correct if seared on a burger.
Image
John Deere Grill (Weber).dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Chopper John
Mad City Cycles, Inc.

"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
reidy01
2.5 Star Member
2.5 Star Member
Posts: 171
Joined: Sun Aug 21, 2011 3:32 am

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by reidy01 »

Cool thank you for sharing.
User avatar
wilber
2.5 Star Member
2.5 Star Member
Posts: 148
Joined: Sun May 11, 2014 8:23 am

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by wilber »

i am just starting to play with designs for them. I need to build a roller before but once i get a couple designs i will post them. just working on repeating patterns and some off the wall stuff just to try out.
*** DynaTorch Super B 4x8 with a Hypertherm Powermax 65****
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by tnbndr »

Just an FYI on creating the files for the rolled fire rings, you need to leave enough material top and bottom so that they will hold their shape and be sturdy. It helps to leave as much material as you possibly can and still get the design idea across. Don't ask me how I know this!
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
Thumper
2.5 Star Member
2.5 Star Member
Posts: 110
Joined: Tue Jan 29, 2013 8:22 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by Thumper »

I'm about to purchase a powered roller and give them a whirl myself :D
grindergary
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 623
Joined: Sat Aug 25, 2012 8:08 pm
Location: Edmonton, Alberta Canada
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by grindergary »

Wow, thank you all for the great files!

Soon I hope to be able to contribute something back to the forum.

Gary
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
cbassjr
3 Star Member
3 Star Member
Posts: 307
Joined: Fri Dec 21, 2012 5:21 pm

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by cbassjr »

Super thread and super idea. Would be nice to start some other threads would save hours of time..... plus people could post to the right area of interest....
User avatar
otisa2007
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 458
Joined: Thu Apr 04, 2013 6:59 pm
Location: mt pleasant texas
Contact:

Re: Fire Pit/Cooking Goodies Sharing Thread

Post by otisa2007 »

here is one that i modified from a couple diffferent fire pits i got from here hope someone can use it great idea on the pire pit thread
fire-pit5.jpg
blank fire pit.pcm

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”