Hot Dog Marshmallow Roaster
-
- 2.5 Star Member
- Posts: 235
- Joined: Wed May 18, 2011 11:05 am
Hot Dog Marshmallow Roaster
A few hot dog roaster we have made.
-
- 2 Star Member
- Posts: 80
- Joined: Fri Apr 13, 2012 4:38 pm
- Location: Iowa
Re: Hot Dog Marshmallow Roaster
Great idea I can see where these will be great items to have around for the kids and me thanks
Home Built 5*5 table pm45
-
- 2 Star Member
- Posts: 82
- Joined: Thu Feb 04, 2010 6:03 am
- Location: Templeton, Pa
- Contact:
Re: Hot Dog Marshmallow Roaster
Nice, that takes the lid off for many ideas. The old originals, when I get time I cut several sets, cant keep them in the shop, wouldn't want to guess how many I've sold. Great Job !!!
-
- 4 Star Elite Contributing Member
- Posts: 801
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
Re: Hot Dog Marshmallow Roaster
Now, that's a neat idea!
Allen
Allen
-
- 3.5 Star Member
- Posts: 566
- Joined: Wed Sep 19, 2012 6:43 am
Re: Hot Dog Marshmallow Roaster
These are great!
-
- 2 Star Member
- Posts: 85
- Joined: Tue Mar 27, 2012 7:23 pm
Re: Hot Dog Marshmallow Roaster
These are great! Mind sharing how you are making them?
-
- 2.5 Star Elite Contributing Member
- Posts: 130
- Joined: Fri Oct 16, 2009 10:34 pm
Re: Hot Dog Marshmallow Roaster
Hot dog sticks are basically my main business.. I have that exact hot rod roaster, just looked, its a little different.. .
5x10 LDR
-
- 2.5 Star Member
- Posts: 117
- Joined: Thu Feb 23, 2012 10:06 pm
- Location: Montana
Re: Hot Dog Marshmallow Roaster
These are so awesome........did you make them out of stainless?
Toni
Toni
-
- 2.5 Star Member
- Posts: 235
- Joined: Wed May 18, 2011 11:05 am
Re: Hot Dog Marshmallow Roaster
No they are made out of mild steel, but the 4 inch point is stainless.crazy59860 wrote:These are so awesome........did you make them out of stainless?
Toni
-
- 2.5 Star Member
- Posts: 117
- Joined: Thu Feb 23, 2012 10:06 pm
- Location: Montana
Re: Hot Dog Marshmallow Roaster
Thank you........thought they looked like steel but was wondering about food safe.
They are awesome.
Toni
They are awesome.
Toni
-
- 2 Star Member
- Posts: 82
- Joined: Tue Mar 26, 2013 9:03 pm
Re: Hot Dog Marshmallow Roaster
Where are you getting your sticks for the hot dog roasters ???
So much to read, so little time.
If you consider yourself a master of something, does that mean you refuse to learn anymore about it ???
If you consider yourself a master of something, does that mean you refuse to learn anymore about it ???
-
- 3.5 Star Member
- Posts: 566
- Joined: Wed Sep 19, 2012 6:43 am
Re: Hot Dog Marshmallow Roaster
How are they kept from rusting?34chev wrote:No they are made out of mild steel, but the 4 inch point is stainless.crazy59860 wrote:These are so awesome........did you make them out of stainless?
Toni
-
- 2 Star Member
- Posts: 82
- Joined: Tue Mar 26, 2013 9:03 pm
Re: Hot Dog Marshmallow Roaster
If the 4" point is stainless, theres no worry about rusting there. I would paint the rest high temp black. The ones I have made I just used mild steel. I treat the hot dog end as if it were cast iron. Season it with some butter or cooking spray and then slow cook a couple hot dogs on it until they are black. Then spray it down good again with some spray butter or whatever and it should be good for a long while as long as it doesn't get wet. Now after that complicated explanation, here is a brief one. Treat it as cast iron. lol
So much to read, so little time.
If you consider yourself a master of something, does that mean you refuse to learn anymore about it ???
If you consider yourself a master of something, does that mean you refuse to learn anymore about it ???
-
- 1.5 Star Member
- Posts: 25
- Joined: Wed Aug 04, 2010 1:34 pm
Re: Hot Dog Marshmallow Roaster
where do you get the handles
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
Re: Hot Dog Marshmallow Roaster
was there ever any dxf files on these guys ?
Greg From Storiesnsteel
-
- 2.5 Star Member
- Posts: 235
- Joined: Wed May 18, 2011 11:05 am
Re: Hot Dog Marshmallow Roaster
Handles are just from the hardware store and cut to length then a hole drilled in them to fit.
No we haven't put any dxf files for them. If you are interested just message me.
No we haven't put any dxf files for them. If you are interested just message me.
- Buzzard Gut
- 3 Star Member
- Posts: 364
- Joined: Mon Jun 27, 2011 2:07 pm
- Location: Coos Bay Oregon
-
- 1.5 Star Member
- Posts: 26
- Joined: Thu May 23, 2013 2:33 am
Re: Hot Dog Marshmallow Roaster
How much do you get for them?
-
- 3 Star Elite Contributing Member
- Posts: 412
- Joined: Thu Jun 25, 2015 4:06 pm
- Contact:
Re: Hot Dog Marshmallow Roaster
Terrific idea and a great way to burn up some scrap!
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
-
- 2.5 Star Member
- Posts: 235
- Joined: Wed May 18, 2011 11:05 am
Re: Hot Dog Marshmallow Roaster
$20 a pieceRusscott wrote:How much do you get for them?
-
- 1/2 Star Member
- Posts: 3
- Joined: Mon Mar 12, 2018 8:34 am
Re: Hot Dog Marshmallow Roaster
Can you send Dax files
-
- 3 Star Elite Contributing Member
- Posts: 448
- Joined: Thu Jul 11, 2013 8:46 pm
- Location: NEW MEXICO
Re: Hot Dog Marshmallow Roaster
Really great idea, thanks
-
- 2.5 Star Member
- Posts: 235
- Joined: Wed May 18, 2011 11:05 am
Re: Hot Dog Marshmallow Roaster
We now make them completely out of stainless.michmetalman wrote:How are they kept from rusting?34chev wrote:No they are made out of mild steel, but the 4 inch point is stainless.crazy59860 wrote:These are so awesome........did you make them out of stainless?
Toni
-
- 2.5 Star Member
- Posts: 235
- Joined: Wed May 18, 2011 11:05 am
Re: Hot Dog Marshmallow Roaster
$20 a pieceRusscott wrote:How much do you get for them?
-
- 1.5 Star Member
- Posts: 36
- Joined: Fri Apr 07, 2017 10:17 am
Re: Hot Dog Marshmallow Roaster
$20 for stainless?