Cutting Thin Gauge Material
-
pdjcutandfab
- 2.5 Star Elite Contributing Member
- Posts: 158
- Joined: Sat Jul 18, 2009 10:40 am
Cutting Thin Gauge Material
Wondering what the thinnest material is you've cut with your plasma table? Any tips? Thanks.
-
abmetal
- 4 Star Elite Contributing Member
- Posts: 799
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
Re: Cutting Thin Gauge Material
I've cut 28ga. galvanized clean as a button.
Allen
Allen
-
jimcolt
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: Cutting Thin Gauge Material
26 gauge galvanized....beautiful! (Powermax85 running at 40 amps, 325 ipm)
Jim Colt
Jim Colt
-
muzza
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: Cutting Thin Gauge Material
Cut some painting stencils from 0.45mm (which I think is about 26 or 28 gauge) zincaneal, had the speed cranked up to 8 metres per minute (about 315 ipm) and came out spot on.
Murray
Murray
-
GPM870
- 2 Star Member
- Posts: 72
- Joined: Sun Mar 18, 2012 10:39 pm
Re: Cutting Thin Gauge Material
The thinnest I have cut is 31 gauge tin plate steel.
Powermax 85 45amp nozzle 325 ipm 25amps of power. Little hard on consumables but nice cut.
Powermax 85 45amp nozzle 325 ipm 25amps of power. Little hard on consumables but nice cut.
Powermax 85
Sheetcam
Mach 3
4 x 4 burntables table
Sheetcam
Mach 3
4 x 4 burntables table
