Garden Sundial DXF FIle

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
bwgsmith
3.5 Star Member
3.5 Star Member
Posts: 548
Joined: Tue May 25, 2010 11:42 am

Re: Garden Sundial

Post by bwgsmith »

Same Corel x3 dosnt like it.
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Garden Sundial

Post by Larry83301 »

Try this one.

Larry
Image

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

GWS.Arkansas
2.5 Star Member
2.5 Star Member
Posts: 122
Joined: Fri Jun 10, 2011 6:30 pm

Re: Garden Sundial

Post by GWS.Arkansas »

many thanks that worked well
muzza
4 Star Member
4 Star Member
Posts: 1472
Joined: Wed Feb 04, 2009 5:35 pm

Re: Garden Sundial

Post by muzza »

nuno115 wrote:Amazing. Thanks
I just wished someone makes one that I can use in NY....
When i modified one posted here previously by Scratch I went to this site to get the correct geometry and altered it X5
http://www.anycalculator.com/horizontalsundial.htm Google "lattitude + your location" and enter the details and it will tell you all the angles.
Murray
bwgsmith
3.5 Star Member
3.5 Star Member
Posts: 548
Joined: Tue May 25, 2010 11:42 am

Re: Garden Sundial

Post by bwgsmith »

That workes thanks
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Garden Sundial

Post by tnbndr »

TNBNDR I am getting $320 for these raw, $360 prep'd and primered and $410 powdercaoted
Thanks for that info.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
sbest1
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 628
Joined: Fri Jan 16, 2009 10:26 pm

Re: Garden Sundial

Post by sbest1 »

Thanks a Bunch! That will look great in my garden.
ronniep
1.5 Star Member
1.5 Star Member
Posts: 41
Joined: Thu Sep 15, 2011 1:04 pm

Re: Garden Sundial

Post by ronniep »

looks great,thanks !
invader28
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Tue Dec 13, 2011 5:09 pm
Location: Hayward, CA

Re: Garden Sundial

Post by invader28 »

haven't been here for a while.......thanks
Torchmate 4x4 GS w/AVHC
Hypertherm PM45
Dynasty 350
Miller 251x
User avatar
kb3gun
2.5 Star Member
2.5 Star Member
Posts: 194
Joined: Thu Feb 09, 2012 6:40 pm
Location: Shanksville, PA

Re: Garden Sundial

Post by kb3gun »

Great file. Thanks for sharing!
-Smitty
Torchmate 4X4 Growth Series w/AVHC
Hypertherm PM45 w/ Machine Torch
Miller Syncrowave 210 TIG
User avatar
BlackDogMetalWorx
1 Star Member
1 Star Member
Posts: 24
Joined: Mon Jul 18, 2011 4:58 pm

Re: Garden Sundial

Post by BlackDogMetalWorx »

Nice work!
kevin53
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 179
Joined: Sat Oct 23, 2010 5:22 pm

Re: Garden Sundial

Post by kevin53 »

Great detail. Now if only i could read one.
thank you
Ryle524
1.5 Star Member
1.5 Star Member
Posts: 37
Joined: Fri Mar 30, 2012 10:57 pm

Re: Garden Sundial

Post by Ryle524 »

very nice work thanks
B Holmes
2 Star Member
2 Star Member
Posts: 85
Joined: Mon Aug 06, 2012 9:29 pm

Re: Garden Sundial

Post by B Holmes »

Great work! Thank you.
5 x 10 Air bladder water table
Precision plasma HDB gantry
CandCnC 620-4 Bladerunner
Feather touch ohmic plate sensing
Hypertherm Powermax 65
2015 Autocad lt
Sheetcam
Mach 3
Central California
User avatar
SCHIDTHEAD
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 276
Joined: Fri Jan 08, 2010 12:28 am
Location: Under a Hood

Re: Garden Sundial

Post by SCHIDTHEAD »

You are all welcome; I haven't seen one built yet though...
"Government, even in its best state, is but a necessary evil; in its worst state, an intolerable one."--Thomas Paine 1776
waters035
1.5 Star Member
1.5 Star Member
Posts: 33
Joined: Sun Apr 01, 2012 12:50 am

Re: Garden Sundial

Post by waters035 »

thank you very much
chris hoggard
1.5 Star Member
1.5 Star Member
Posts: 41
Joined: Sat Apr 07, 2012 10:45 am

Re: Garden Sundial

Post by chris hoggard »

Thanks for this file i will cut one this week and show it off chris
User avatar
Laser Chicks
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Wed Jun 27, 2012 5:50 pm
Location: Red Deer, Alberta
Contact:

Re: Garden Sundial

Post by Laser Chicks »

Very Nice! Thanks for sharing!
LASER CHICKS

LASERMANN CUTS LTD
# 2, 6718 Golden West Avenue
Red Deer, Alberta
T4P 1A8
http://www.lasermanncuts.com
grindergary
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 623
Joined: Sat Aug 25, 2012 8:08 pm
Location: Edmonton, Alberta Canada
Contact:

Re: Garden Sundial

Post by grindergary »

Thank you for the file. Wife will love this
Thanks

Gary
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
Just John
1.5 Star Member
1.5 Star Member
Posts: 33
Joined: Sun Dec 23, 2012 7:21 pm
Location: Littleton, Colorado

Re: Garden Sundial

Post by Just John »

Really nice work. I am new the the forum and have be so impressed with the abilities of the people on this site. Keep up the great work.
Just John
1.5 Star Member
1.5 Star Member
Posts: 33
Joined: Sun Dec 23, 2012 7:21 pm
Location: Littleton, Colorado

Re: Garden Sundial

Post by Just John »

Sorry for the double post. I forgot the most important thing. Thank you for sharing your work!
User avatar
yeomansjon
3 Star Member
3 Star Member
Posts: 329
Joined: Fri Oct 05, 2012 1:28 pm
Contact:

Re: Garden Sundial

Post by yeomansjon »

Thanks! Actually this would make a great end table too without the shadow maker on it. Great file!
Fast Jonny Custom Design
CNC Plasma Cutting
Plasmacam DHC
Hypertherm Powermax 1000
www.facebook.com/fastjonnycustomdesign
kangy
2 Star Member
2 Star Member
Posts: 68
Joined: Tue Jan 28, 2014 3:20 am
Location: South Africa

Re: Garden Sundial

Post by kangy »

Thank You for the share
Truly amazing work !!
RGR
2.5 Star Member
2.5 Star Member
Posts: 107
Joined: Wed Dec 11, 2013 3:21 am

Re: Garden Sundial

Post by RGR »

Whats is a good Gauge to cut this out of? Anyone have a finished picture? Very Nice! Thanks for sharing a great piece!
retiredcpo
2 Star Member
2 Star Member
Posts: 95
Joined: Thu Nov 17, 2011 9:21 pm

Re: Garden Sundial

Post by retiredcpo »

im in the middle of building three of these.
Im using 10 guage an it seams to be working very well
Very nice file
retiredcpo
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”