Fallen Soldier Memorial

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
User avatar
steelfx
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 768
Joined: Sat Oct 10, 2009 12:09 am
Location: St. George, Utah
Contact:

Fallen Soldier Memorial

Post by steelfx »

This is scaled to cut best at 4' wide...
:)

Image
fallen_soldier.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

med-pac
1 Star Member
1 Star Member
Posts: 13
Joined: Thu Oct 29, 2009 8:38 am

Re: Fallen Soldier Memorial

Post by med-pac »

Nice work Bill!
Think I'll have to cut this out for the local VFW.

Mike
DumOleBob
2 Star Member
2 Star Member
Posts: 73
Joined: Mon Jul 27, 2009 7:29 pm

Re: Fallen Soldier Memorial

Post by DumOleBob »

Best I've seen! Thanks!!!
AIRFLOWKID
2.5 Star Member
2.5 Star Member
Posts: 229
Joined: Sun Sep 27, 2009 9:48 pm

Re: Fallen Soldier Memorial

Post by AIRFLOWKID »

Bill,
If you were to apply a patina to this what would be your means of application? I use a 55 gal. drum and dip piece into drum, but what is the best way to do larger pieces such as the one above? Do you use an aspirator to apply? Ordinary spray bottle? brush?
Thanks for the info. Tim Red Robin Creatives
User avatar
steelfx
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 768
Joined: Sat Oct 10, 2009 12:09 am
Location: St. George, Utah
Contact:

Re: Fallen Soldier Memorial

Post by steelfx »

AIRFLOWKID wrote:Bill,
If you were to apply a patina to this what would be your means of application? I use a 55 gal. drum and dip piece into drum, but what is the best way to do larger pieces such as the one above? Do you use an aspirator to apply? Ordinary spray bottle? brush?
Thanks for the info. Tim Red Robin Creatives
Hi Tim,

I'd highly recommend a Viton Seal Pressure Pump for the Copper FX Base. I have those in stock & on my 'Supplies'
page of my website. http://www.steelf-x.com/Supplies.html

The trick is to pre-wet (with water) the polished side of your larger piece, prime your pump-sprayer with about 35-40 pumps, spray (starting at the top) with a fine mist of Copper FX.
Flush/Rinse with "Shower" setting on an adjustable spray nozzle very quickly & thoroughly. You don't want the Copper FX
to stay on the piece more than 3-5 seconds.

Now, you'll be ready for subsequent patinas, e.g. Pewter FX (which will give a bronzing effect) and/or Torch FX for reds and blues.

thanks,

Bill
signature_logo_sfx.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

AIRFLOWKID
2.5 Star Member
2.5 Star Member
Posts: 229
Joined: Sun Sep 27, 2009 9:48 pm

Re: Fallen Soldier Memorial

Post by AIRFLOWKID »

Bill,
Thanks for all the info.I will be place an order in the near future. You are a great resource for me to learn more and succeed in business.
Thanks so much, Tim
User avatar
Loyd
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 688
Joined: Tue Nov 03, 2009 12:28 am
Location: Bald Knob, AR
Contact:

Re: Fallen Soldier Memorial

Post by Loyd »

Bill, From a former Marine, thanks for the file. You are a craftsman.
Loyd
De inimico non loquaris sed cogites
Do not wish ill upon your enemies, plan it.
User avatar
steelfx
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 768
Joined: Sat Oct 10, 2009 12:09 am
Location: St. George, Utah
Contact:

Re: Fallen Soldier Memorial

Post by steelfx »

thanks, Loyd! Thank YOU for your service to our Country! bw
Ray Mighells
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Mon Aug 29, 2011 7:45 pm

Re: Fallen Soldier Memorial

Post by Ray Mighells »

Thanks for the file I will put it to good use for a close friend of mine who lost his son in Iraq.God Bless you and all the Vets out there.
Smoke
mdoffroad
2 Star Member
2 Star Member
Posts: 94
Joined: Wed Mar 30, 2011 10:10 pm

Re: Fallen Soldier Memorial

Post by mdoffroad »

GREAT WORK........Thank you for sharing!!!
GWS.Arkansas
2.5 Star Member
2.5 Star Member
Posts: 122
Joined: Fri Jun 10, 2011 6:30 pm

Re: Fallen Soldier Memorial

Post by GWS.Arkansas »

For some reason When I opened it it was so small I couldnt see it . I tried to inlarge it but would not work. Can anyone give me a hand opening this file. Please . I am using Corel X3. Thanks to all
User avatar
FiveORacing
2.5 Star Member
2.5 Star Member
Posts: 207
Joined: Thu Dec 09, 2010 9:46 pm

Re: Fallen Soldier Memorial

Post by FiveORacing »

GWS.Arkansas wrote:For some reason When I opened it it was so small I couldnt see it . I tried to inlarge it but would not work. Can anyone give me a hand opening this file. Please . I am using Corel X3. Thanks to all
That's odd, mine came out 46 x 43.
fallen_soldier.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

GWS.Arkansas
2.5 Star Member
2.5 Star Member
Posts: 122
Joined: Fri Jun 10, 2011 6:30 pm

Re: Fallen Soldier Memorial

Post by GWS.Arkansas »

Not sure what I am doing wrong but it still doing the same thing. But thanks for trying again.
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Fallen Soldier Memorial

Post by Larry83301 »

It opened up 46" X 43" for me, also. I resaved it from MasterCam and am posting it here. Hope it helps.

Larry
FALLEN_SOLDIER-2.DXF

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

GWS.Arkansas
2.5 Star Member
2.5 Star Member
Posts: 122
Joined: Fri Jun 10, 2011 6:30 pm

Re: Fallen Soldier Memorial

Post by GWS.Arkansas »

not sure what you did but it worked that time. I dont know crazy computers. thanks for the file and the help
lucky7sg
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 123
Joined: Sat May 02, 2015 12:38 pm

Re: Fallen Soldier Memorial

Post by lucky7sg »

thankyou will work perfectly for a piece I have to design for our veterans memorial garden
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”