I have been doing plenty of talking about how I cant fix my machine, but believe it or not, I considered myself pretty good at this stuff before she broke.
Here is a few of the plasma jobs we put out, and hope to again soon, as soon as old gertie is repaired.
Back before she broke
-
- 1 Star Elite Contributing Member
- Posts: 12
- Joined: Thu Aug 18, 2011 8:47 pm
- Location: Brisbane, Australia
- Contact:
-
- 6 Star Elite Contributing Member
- Posts: 8683
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Back before she broke
Duaneo, those are some fantastic looking pieces. I hope you get your machine back up and running soon. I seem to remember from the past thread that you have a Sampson 510 with some problems. PM me and I will be happy to try to help you. I have a DHC2 which is about 6 years old now and still working great.
David
David
-
- 3 Star Elite Contributing Member
- Posts: 448
- Joined: Thu Jul 11, 2013 8:46 pm
- Location: NEW MEXICO
Re: Back before she broke
Nice work, thank you.
-
- 3.5 Star Member
- Posts: 540
- Joined: Thu Dec 05, 2019 11:33 am
Re: Back before she broke
Nice work indeed! Good luck getting back up and running quickly.
-
- 1 Star Elite Contributing Member
- Posts: 12
- Joined: Thu Aug 18, 2011 8:47 pm
- Location: Brisbane, Australia
- Contact:
Re: Back before she broke
A few more.....
-
- 6 Star Elite Contributing Member
- Posts: 8683
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
-
- 3.5 Star Elite Contributing Member
- Posts: 364
- Joined: Sun Dec 13, 2009 8:59 pm
- Location: Tacoma, Wa.
Re: Back before she broke
Hope she's up and running soon. Some nice work there!
- rusty gates
- 1.5 Star Member
- Posts: 38
- Joined: Tue Feb 01, 2022 8:29 pm
Re: Back before she broke
Hi Duaneo
You've got some great examples of your work, there. As soon as I spotted the GMH logo, I figured you were from Oz....I'm in WA.
I've used that logo on some keyholders.
What broke on your machine???
regards
Rusty...
You've got some great examples of your work, there. As soon as I spotted the GMH logo, I figured you were from Oz....I'm in WA.
I've used that logo on some keyholders.
What broke on your machine???
regards
Rusty...
Rusty's Metal Cut Signs & Designs
Homebuilt 4' x 4' table
MyPlasm CNC Controller & plasma interface unit
Thermacut SD55 Plasma Cutter
https://www.youtube.com/channel/UCKIMjD ... MiyyzSe_Jg
Homebuilt 4' x 4' table
MyPlasm CNC Controller & plasma interface unit
Thermacut SD55 Plasma Cutter
https://www.youtube.com/channel/UCKIMjD ... MiyyzSe_Jg
-
- 6 Star Elite Contributing Member
- Posts: 8683
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Back before she broke
I seem to remember another post, possibly in the Plasmacam section, where he talked about his table. I think it may have been a Sampson 510. As I recall, his local supplier had suggested he replace most of the parts on the table and it still didn't work correctly. I don't remember what the resolution was - if any.rusty gates wrote: ↑Fri Oct 21, 2022 8:31 am Hi Duaneo
You've got some great examples of your work, there. As soon as I spotted the GMH logo, I figured you were from Oz....I'm in WA.
I've used that logo on some keyholders.
What broke on your machine???
regards
Rusty...
David
-
- 6 Star Elite Contributing Member
- Posts: 8683
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Back before she broke
I found the thread.
https://www.plasmaspider.com/viewtopic.php?f=61&t=34255
We tried to help him, but never got the answers to the questions we were asking. So don't know if the situation was resolved - or not.
David
https://www.plasmaspider.com/viewtopic.php?f=61&t=34255
We tried to help him, but never got the answers to the questions we were asking. So don't know if the situation was resolved - or not.
David
-
- 3 Star Member
- Posts: 313
- Joined: Tue Jul 28, 2009 11:23 pm
- Location: Weiser, ID
- Contact:
Re: Back before she broke
Awesome work, especially love the tiger one.