Elite Member Contest - WINNER
- txskinney
- 1 Star Elite Contributing Member
- Posts: 10
- Joined: Thu Oct 28, 2010 11:43 pm
- Location: Big Spring, Texas
- Contact:
Re: Elite Member Contest - Surprise Giveaway
Plasmacam 98-z and a hypertherm 45 powermax
-
- 2.5 Star Member
- Posts: 235
- Joined: Wed May 18, 2011 11:05 am
Re: Elite Member Contest - Surprise Giveaway
Ours is homemade
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Elite Member Contest - Surprise Giveaway
I have a Hypertherm PM45 on an LDR 4x8 table.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 2.5 Star Member
- Posts: 171
- Joined: Fri Nov 18, 2016 5:13 pm
Re: Elite Member Contest - Surprise Giveaway
Thank you for operating and maintaining this amazing site.
Hypertherm Powermax 45XP on an Arclight 4' x 4' table.
Hypertherm Powermax 45XP on an Arclight 4' x 4' table.
Tim Eggleston
Banks High School
Banks, OR
Arc Pro 4800
PowerMax 45XP
Mach 3, SheetCam
Inkscape, Rhino 3D
Banks High School
Banks, OR
Arc Pro 4800
PowerMax 45XP
Mach 3, SheetCam
Inkscape, Rhino 3D
-
- 2.5 Star Elite Contributing Member
- Posts: 149
- Joined: Tue Apr 17, 2012 3:48 pm
- Location: S/W Louisiana
Re: Elite Member Contest - Surprise Giveaway
i have a 2*4 torchmate with a powermax 85
-
- 1/2 Star Member
- Posts: 7
- Joined: Tue Jan 10, 2017 2:29 pm
Re: Elite Member Contest - Surprise Giveaway
Hypertherm 85 on an ArcLight 5'x10' table
AFTER HOURS FABRICATIONS
ARC LIGHT PRO 5'X10' TABLE
HYPERMAX 85 PLASMA CUTTER
ARC LIGHT PRO 5'X10' TABLE
HYPERMAX 85 PLASMA CUTTER
- see&see
- 2.5 Star Elite Contributing Member
- Posts: 218
- Joined: Tue Jun 24, 2014 12:04 pm
- Location: Minden, Nevada
- Contact:
Re: Elite Member Contest - Surprise Giveaway
1. Hypertherm 85 and PlasmaCam Sampson 5 x 10 table
2. Hypertherm 45XP and PlasmaCam 4 x 4 table
2. Hypertherm 45XP and PlasmaCam 4 x 4 table
You marry into the PlasmaCam family and must accept the fact your software and hardware are proprietary. It's a for better or for worse engagement with overwhelming security. PlasmaCam controls the computer, table, hardware to their advantage IMO. ![Mad :x](./images/smilies/icon_mad.gif)
![Mad :x](./images/smilies/icon_mad.gif)
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Elite Member Contest - Surprise Giveaway
Hypertherm 65
Thanks for the contest.
Thanks for the contest.
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
- Sampson Jones
- 3 Star Elite Contributing Member
- Posts: 333
- Joined: Mon Jul 25, 2011 9:30 pm
Re: Elite Member Contest - Surprise Giveaway
I have a Hypertherm pm 45 with machine torch
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
-
- 3.5 Star Elite Contributing Member
- Posts: 623
- Joined: Sat Aug 25, 2012 8:08 pm
- Location: Edmonton, Alberta Canada
- Contact:
Re: Elite Member Contest - Surprise Giveaway
PM 105 and PM85
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
-
- 1/2 Star Member
- Posts: 1
- Joined: Wed Jul 13, 2016 8:14 am
Re: Elite Member Contest - Surprise Giveaway
Plasmacam dhc2
Tbone929@bex.net
Tbone929@bex.net
-
- 2.5 Star Member
- Posts: 199
- Joined: Mon Dec 08, 2014 4:33 pm
- Location: Gentry, AR
- Contact:
Re: Elite Member Contest - Surprise Giveaway
Thanks for the chance admin!
Currently using a TD Ultracut 200XT hi-def plasma on a 5x10 Dynatorch table.
Currently using a TD Ultracut 200XT hi-def plasma on a 5x10 Dynatorch table.
5x10 Dynatorch High Definition plasma table. Cuttingshop drawing program. Sigmanest nesting program. Custom fabrication and powder coating.
Whatsoever thy hand findeth to do, do it with thy might Ecclesiastes 9:10
Whatsoever thy hand findeth to do, do it with thy might Ecclesiastes 9:10
-
- 2.5 Star Member
- Posts: 181
- Joined: Wed Jan 20, 2010 6:55 pm
- Location: Canada
Re: Elite Member Contest - Surprise Giveaway
Just noticed this give-away and hope we're not too late for a chance to win!
I have a Hypertherm 1000 and running a Dynatorch table that's 5' x 10'.
I have a Hypertherm 1000 and running a Dynatorch table that's 5' x 10'.
- cguethert
- 1.5 Star Member
- Posts: 47
- Joined: Thu May 18, 2017 12:47 pm
Re: Elite Member Contest - Surprise Giveaway
Appreciate all the hard work done by admin and members.
Thanks All!
Fastcut cnc
Hypertherm PM65
Thanks All!
Fastcut cnc
Hypertherm PM65
-
- 1.5 Star Elite Contributing Member
- Posts: 27
- Joined: Wed Feb 12, 2014 9:57 pm
Re: Elite Member Contest - Surprise Giveaway
Not sure if I am an elite member but just in case. Thanks to all who work so hard to keep this site going. I am truly amazed at the artists and imaginations at work here. I only wish I had half the talent most of y'all do.
plasmacam 4'x4'
Hypertherm 45
design edge
AutoCAD
200 amp Caliburn HD plasma
Thermal Dynamics 8'X20'
plasmacam 4'x4'
Hypertherm 45
design edge
AutoCAD
200 amp Caliburn HD plasma
Thermal Dynamics 8'X20'
- admin
- Site Admin
- Posts: 368
- Joined: Thu Jul 03, 2008 5:12 pm
- Location: Out In The Shop
- Contact:
Re: Elite Member Contest - WINNER
Today is the day we choose the winner. This contest was a random draw for an EasyScriber scribing tool for a Hypertherm torch
The winner of this random draw is our Elite Contributing member.....
jason.jason.p
![Image](http://www.plasmaspider.com/images/EasyContest.png)
The EasyScriber has become very popular and I hope you find it to be a useful addition to your plasma table and Hypertherm torch Jason!
Please send me a PM with your shipping address and we will this out to you right away!
Stay tuned for more giveaways, we have more plasma swag to be had from some of our other sponsors![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Surprised :o](./images/smilies/icon_e_surprised.gif)
The winner of this random draw is our Elite Contributing member.....
jason.jason.p
![Image](http://www.plasmaspider.com/images/EasyContest.png)
The EasyScriber has become very popular and I hope you find it to be a useful addition to your plasma table and Hypertherm torch Jason!
Please send me a PM with your shipping address and we will this out to you right away!
Stay tuned for more giveaways, we have more plasma swag to be had from some of our other sponsors
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1939
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Elite Member Contest - WINNER
Congratulations.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1171
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Elite Member Contest - WINNER
Awesome prize, congrats!!
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
- Gamelord
- 4.5 Star Member
- Posts: 1637
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Elite Member Contest - WINNER
Congrats Jason!!! Awesome prize, thank you PS for taking care of all of us.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 806
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
Re: Elite Member Contest - WINNER
Congrats to Jason on an awesome prize! Thanks for the chance at a great giveaway!
I think I'm the oldest 10 year old boy on the forum...
-
- 3.5 Star Member
- Posts: 681
- Joined: Wed Nov 26, 2014 5:12 pm
Re: Elite Member Contest - WINNER
Congratulations Jason!*!*!*!*!*!*!*!*!*!*
- hdfaster
- 3.5 Star Elite Contributing Member
- Posts: 501
- Joined: Thu Jan 07, 2010 11:38 pm
Re: Elite Member Contest - WINNER
Nice. Congrats Jason.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7796
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Elite Member Contest - WINNER
Congrats to Jason, Free stuff always puts a smile on your face
just another plus from Plasma Spider, you guys need a pat on the back, here is one sent digitally
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- admin
- Site Admin
- Posts: 368
- Joined: Thu Jul 03, 2008 5:12 pm
- Location: Out In The Shop
- Contact:
Re: Elite Member Contest - WINNER
acourtjester wrote:Congrats to Jason, Free stuff always puts a smile on your facejust another plus from Plasma Spider, you guys need a pat on the back, here is one sent digitally
![]()
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
Have a great weekend everyone!
-
- 4 Star Member
- Posts: 950
- Joined: Thu Jan 02, 2014 6:33 pm
Re: Elite Member Contest - WINNER
Hypertherm powermax45
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor