Our Youtube Channel

Star-Lab plasma table discussion forum
Post Reply
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Our Youtube Channel

Post by BTA Plasma »

Please see our youtube channel for some quick software training videos. We have many videos in the works.

https://www.youtube.com/channel/UC8H3H9 ... Wmcbl7Vh-Q
User avatar
_Ogre
3.5 Star Member
3.5 Star Member
Posts: 529
Joined: Sun Sep 15, 2013 4:26 pm
Location: Motown

Re: Our Youtube Channel

Post by _Ogre »

nice work BTA :mrgreen:

if you'd like to post our rotacut videos on your channel, you are welcome to use them
only 2 with low res but they get the point across

https://www.youtube.com/watch?v=Ilc_ldF7eLE

https://www.youtube.com/watch?v=8D7JpWrDDaM

the rotocut is the reason we went with bta
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley :mrgreen: how cool!
User avatar
Scratch
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 807
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: Our Youtube Channel

Post by Scratch »

BTA Plasma wrote:Please see our youtube channel for some quick software training videos. We have many videos in the works.

https://www.youtube.com/channel/UC8H3H9 ... Wmcbl7Vh-Q
Is this Matt from Bulltear? The guy from Minnesota?
I think I might have made you some parts before you got your tables...?
I think I'm the oldest 10 year old boy on the forum...
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Post by BTA Plasma »

Matt here. I am one of the folks that use the BTA plasma profile. How are you buddy? Machine been cutting good for you? Ready for an update?
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Post by BTA Plasma »

_Ogre wrote:nice work BTA :mrgreen:

if you'd like to post our rotacut videos on your channel, you are welcome to use them
only 2 with low res but they get the point across

https://www.youtube.com/watch?v=Ilc_ldF7eLE

https://www.youtube.com/watch?v=8D7JpWrDDaM

the rotocut is the reason we went with bta
Thank you! Yes that rotary that we built was the base idea for the Rotacut II with a 2,5" through hole.
User avatar
_Ogre
3.5 Star Member
3.5 Star Member
Posts: 529
Joined: Sun Sep 15, 2013 4:26 pm
Location: Motown

Re: Our Youtube Channel

Post by _Ogre »

our cnc plasma cutting is 99% exhaust work: tube copes, holes in tubes and flanges, thus we need the inside of the tube as clean as the outside
if you look at the video, notice we use a coolant pump in the center hole of the rotacut chuck to keep dross out of the inside of the tube
coolant (table water) pump is a $15 aquarium pump that we've had since we set the table up 5 years ago
rotacut is the main use/purchase for our table, anything beyond that is a bonus, now we cut a lot of ss flanges and custom turbo flanges
works great for the investment we have in it

thanks matt for a great product :mrgreen:
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley :mrgreen: how cool!
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Post by BTA Plasma »

Yes that was a very good idea the coolant pump.
Pat4rd
2 Star Member
2 Star Member
Posts: 82
Joined: Thu Apr 06, 2017 6:32 pm

Re: Our Youtube Channel

Post by Pat4rd »

Bta thank you for the video, I'm wanting to upgrade my table and I'm doing my homework on which one to go with! getting all of this info is great!
Millermatic 252
Hypertherm 45xp machine torch
Eagle 4x4
Mach3, sheetcam, adobe il, inkscape
Proma 150 floating head, Quincy 5hp 60gal, 3 stage dryer.
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Post by BTA Plasma »

Yes that is the best method of purchasing a machine on the market. The market is flooded with different level of machines. We are definitely biased.
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Post by BTA Plasma »

Matt explaining the Limit and Collision systems on the 2018 Star Lab CNC systems . The Proton Z axis and/or the Collision system is available for retro fit on any year Star Lab CNC https://www.youtube.com/watch?v=mTGNbTq5iL8
tylerd
2.5 Star Member
2.5 Star Member
Posts: 123
Joined: Fri Jan 20, 2017 3:25 am

Re: Our Youtube Channel

Post by tylerd »

Sweet !!!
Bulltear 4x8
PN200 Pendant
Linux Command CNC
Hypertherm PM 85
C&CNC Bladerunner Servo
DTHC IV Feather Touch
HyT-Connect DCP-01
Sheetcam Inkscape QCAD
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Our Youtube Channel

Post by djreiswig »

Matt,
I sent you some videos of the flame cutter on my table a while back. I do not see them on the YouTube channel yet.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
Bigrhamr
2.5 Star Member
2.5 Star Member
Posts: 148
Joined: Fri Jan 15, 2010 7:32 pm

Re: Our Youtube Channel

Post by Bigrhamr »

djreiswig wrote:Matt,
I sent you some videos of the flame cutter on my table a while back. I do not see them on the YouTube channel yet.
Are they posted any where else? I have a new Star Lab coming and want to add an oxy fuel torch.
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Our Youtube Channel

Post by djreiswig »

Sorry. No. Matt asked me to send him something, since they have flame accessories but no videos. He gave me some help when I was adding mine so I sent him a couple videos. I'm not sure why he hasn't posted them. I sent them to him over a year ago.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Post by BTA Plasma »

Matt here, will look for those videos. I do recall them and If I remember correctly you did some 1 inch or 3/4 steel. Thank you for sending them in.
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Our Youtube Channel

Post by djreiswig »

Yes. It was 3/4" & 1".
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Post by BTA Plasma »

So that was back in 2016 and the download is not active anymore. The videos were downloaded and the hard drive they were put on was one that fell victim to a lightning strike. If you could resend them I will do my best to promptly put them up on youtube.
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Our Youtube Channel

Post by djreiswig »

What is the preferred way to get them to you? I don't remember how I did it last time.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Post by BTA Plasma »

It appears you used some kind of file service or cloud
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Our Youtube Channel

Post by djreiswig »

Matt,
I sent you a PM with the download links.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Post by BTA Plasma »

1 of them worked. It was with 1" steel. Uploading to YouTube now.
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Post by BTA Plasma »

User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Our Youtube Channel

Post by djreiswig »

Excellent. We're you able to download the other 2 videos?
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Post by BTA Plasma »

2nd one failed, 3rd one said not found.
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Post by BTA Plasma »

Post Reply

Return to “Star-Lab CNC Forum”