Anyone have some advice for squaring the torch?

Cut quality issues can be discussed here, most common issues have been discussed here and should help you.
Post Reply
randyhart48
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sun Oct 29, 2017 6:02 pm

Anyone have some advice for squaring the torch?

Post by randyhart48 »

I have a Plasma Cam DHC2 48x48 and Hypertherm 85. Any suggestions?
User avatar
Gamelord
4.5 Star Member
4.5 Star Member
Posts: 1637
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: Anyone have some advice for squaring the torch?

Post by Gamelord »

I throw a plate on the table and use a square.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Anyone have some advice for squaring the torch?

Post by SeanP »

Rather than square up the torch body I use a combination square wirhout the rule and square onto the retaining cap, found mine wasn't quite straight on the 45.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Post Reply

Return to “Plasma Cut Quality Forum”