Need help converting this file into a dxf for plasma cutting at 15". Can anyone help? Would like to do one or two layers
indian headdress skull
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: indian headdress skull
Here's a quick trace. Will take a lot of clean up but a good start.
Rick
Rick
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 2 Star Member
- Posts: 63
- Joined: Tue Aug 22, 2017 9:59 am
Re: indian headdress skull
thank you rick.
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: indian headdress skull
This isn't sized and spaced to cut at 15". You'll have to adjust the file as needed.
DXF, PLT, and SVG are in the zipped folder.
Post a picture when you cut it.
DXF, PLT, and SVG are in the zipped folder.
Post a picture when you cut it.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 63
- Joined: Tue Aug 22, 2017 9:59 am
Re: indian headdress skull
damn thank you so much robin. that is pretty close the the actual and I was never able to get the left side of the face to clear up. I will cut it and post it. thank you so much.
-
- 2 Star Member
- Posts: 63
- Joined: Tue Aug 22, 2017 9:59 am
Re: indian headdress skull
damn thank you so much robin. that is pretty close the the actual and I was never able to get the left side of the face to clear up. I will cut it and post it. thank you so much.
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: indian headdress skull
You're very welcome!
-
- 2 Star Member
- Posts: 63
- Joined: Tue Aug 22, 2017 9:59 am
Re: indian headdress skull
Robin it cut beautifully
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: indian headdress skull
It looks great!
-
- 2 Star Member
- Posts: 63
- Joined: Tue Aug 22, 2017 9:59 am
Re: indian headdress skull
you made it look that way. I just added and cut it.