Christmas Ornaments

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
tblack1542
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Mon Sep 12, 2016 9:06 pm

Christmas Ornaments

Post by tblack1542 »

Hey guys. Here are a few Christmas ornament files I found and cleaned up. Cuts turned out pretty nice. (Had to adjust my kerf after this first tree)
Image
Ornament_Christmas_Stocking year.dxf
Image
Ornament_Christmas_Christmas Tree.dxf
Image
Ornament_Christmas_Snowflake.dxf
Image
Ornament_Christmas_Snowflake 02.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

mrbuildit
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 81
Joined: Sat Apr 09, 2016 1:22 am

Re: Christmas Ornaments

Post by mrbuildit »

good share... thanks.
motoguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1184
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: Christmas Ornaments

Post by motoguy »

thanks!
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
Metal Works
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 125
Joined: Thu Jul 23, 2015 10:10 am
Location: Richland WA

Re: Christmas Ornaments

Post by Metal Works »

Very thanks
wvbassassassin
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Fri Sep 18, 2015 12:36 pm

Re: Christmas Ornaments

Post by wvbassassassin »

I made these a few years ago... they always go over well at Christmas time.
Image
santa_oval.dxf
Image
snowman_tree.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

lucky7sg
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 123
Joined: Sat May 02, 2015 12:38 pm

Re: Christmas Ornaments

Post by lucky7sg »

Perfect for little corners on the table when I cut. Thanks a million
kellytwedt
2.5 Star Member
2.5 Star Member
Posts: 102
Joined: Fri Mar 28, 2014 10:00 pm

Re: Christmas Ornaments

Post by kellytwedt »

Cute stuff! Thank you for sharing!
covingtoncg
2.5 Star Member
2.5 Star Member
Posts: 105
Joined: Tue Jul 11, 2017 10:34 pm

Re: Christmas Ornaments

Post by covingtoncg »

Thanks for sharing your work
Jfile
2.5 Star Member
2.5 Star Member
Posts: 113
Joined: Sun Jun 03, 2018 2:22 pm

Re: Christmas Ornaments

Post by Jfile »

Very cool ornaments. Thanks for the share. I was just curious what gauge metal you normally use to cut these and approximate size?
LDR 4'x4' Water Table
Command CNC Linux Controller
Plate Marker
Power Max 45xp w/ Machine Torch & Hand Torch
2 Stage filter, Motorguard filter & HF Ref Dryer
InkScape / SheetCam
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”