Jeep Grill Firepit DXF Design

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
motoguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1184
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: Jeep Grill Firepit

Post by motoguy »

I charged $175 out of 3/16". Found several online for $250. I sold the half dozen or so I cut, haven't cut any more since. I would need to recheck, and see if that pricing still holds. They were one of the first items I cut and sold.

ETA: $215 with steel price update.
Last edited by motoguy on Thu Feb 23, 2017 10:37 am, edited 2 times in total.
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
Metal teacher
2.5 Star Member
2.5 Star Member
Posts: 105
Joined: Wed Jun 01, 2016 1:53 pm

Re: Jeep Grill Firepit

Post by Metal teacher »

awesome thanks for sharing
kennye
2.5 Star Member
2.5 Star Member
Posts: 162
Joined: Fri Feb 10, 2017 4:01 pm

Re: Jeep Grill Firepit

Post by kennye »

Thanks for sharing
JUSTWHATEVER
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Mon Dec 19, 2016 5:20 pm

Re: Jeep Grill Firepit

Post by JUSTWHATEVER »

Awesome!!!
User avatar
Gogogadget62
1 Star Member
1 Star Member
Posts: 17
Joined: Fri Mar 17, 2017 9:49 pm

Re: Jeep Grill Firepit

Post by Gogogadget62 »

Thanks for sharing your file ,looking forward to cutting this jeep design
Dan Gauthier
5x10 Samson
Miller 185 wire feeder
600 Hypertherm
45 Hypertherm
85 Hypertherm
40 ton press and dies
powder coating
80 gallon DeVAIR compressor 5Hp
rickjamesbish
2 Star Member
2 Star Member
Posts: 68
Joined: Sun Oct 30, 2016 8:46 pm

Re: Jeep Grill Firepit

Post by rickjamesbish »

I found the 3/16" to be too heavy. Its a break down so obviously meant to be portable. Being jeep shaped its likely geared at off roaders. Granted most JK owners are mall crawlers and will likely use this grill the one time a year they accidentally go off road ;) On the other hand I wheel every weekend so the lighter the better. I did my own personal one in 1/8" and used a few of the longer cutouts tacked under the bottom to prevent warping. I think even a smaller size would be optimal for someone who really off roads regularly so I will try that next.
Jaked937
1.5 Star Elite Contributing Member
1.5 Star Elite Contributing Member
Posts: 32
Joined: Tue Sep 27, 2016 1:04 pm

Re: Jeep Grill Firepit

Post by Jaked937 »

rickjamesbish wrote:I found the 3/16" to be too heavy. Its a break down so obviously meant to be portable. Being jeep shaped its likely geared at off roaders. Granted most JK owners are mall crawlers and will likely use this grill the one time a year they accidentally go off road ;) On the other hand I wheel every weekend so the lighter the better. I did my own personal one in 1/8" and used a few of the longer cutouts tacked under the bottom to prevent warping. I think even a smaller size would be optimal for someone who really off roads regularly so I will try that next.
Have you tried yours out? My steel yard has a bunch of 1/8" for cheap right now, I was thinking about buying a bunch and trying to knock some out.

Anyone else using 1/8" or is 3/16" the norm?
rickjamesbish
2 Star Member
2 Star Member
Posts: 68
Joined: Sun Oct 30, 2016 8:46 pm

Re: Jeep Grill Firepit

Post by rickjamesbish »

Jaked937 wrote:
rickjamesbish wrote:I found the 3/16" to be too heavy. Its a break down so obviously meant to be portable. Being jeep shaped its likely geared at off roaders. Granted most JK owners are mall crawlers and will likely use this grill the one time a year they accidentally go off road ;) On the other hand I wheel every weekend so the lighter the better. I did my own personal one in 1/8" and used a few of the longer cutouts tacked under the bottom to prevent warping. I think even a smaller size would be optimal for someone who really off roads regularly so I will try that next.
Have you tried yours out? My steel yard has a bunch of 1/8" for cheap right now, I was thinking about buying a bunch and trying to knock some out.

Anyone else using 1/8" or is 3/16" the norm?
My own personal one ends up getting sold every time I make it ..LOL .. so I have not had the chance to burn anything in it yet but have received no complaints on the ones I have sold. Im actually going to cut another one this weekend and scale it down in size a little.
BILLETMAN
2.5 Star Member
2.5 Star Member
Posts: 196
Joined: Fri Jul 26, 2013 4:56 pm
Location: northern california

Re: Jeep Grill Firepit

Post by BILLETMAN »

thank you for sharing !!!!
User avatar
david jordan
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 671
Joined: Sun Jul 06, 2014 2:21 pm

Re: Jeep Grill Firepit

Post by david jordan »

this is neat, thank you.
PlasmaCam DHC 2 4 X 4 table
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
Paint Chip
2.5 Star Member
2.5 Star Member
Posts: 108
Joined: Tue Oct 30, 2012 7:43 pm

Re: Jeep Grill Firepit

Post by Paint Chip »

Thanks very much!! No.2 son and I are Jeep enthusiasts. He will live this for Xmas this year.
PPLLC 4X8 table w 620 ox steppers on 5 axes
Bladerunner CandCNC w/DTHC II
Hypertherm PM85
montanarose
1.5 Star Member
1.5 Star Member
Posts: 37
Joined: Mon Apr 23, 2012 6:07 pm

Re: Jeep Grill Firepit

Post by montanarose »

very nice !! what gauge of metal do you recommend for the grill so it doesn't warp with the heat ??
motoguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1184
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: Jeep Grill Firepit

Post by motoguy »

montanarose wrote:very nice !! what gauge of metal do you recommend for the grill so it doesn't warp with the heat ??
I use at least 3/16"
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
ConcFab
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Mon Apr 03, 2017 9:37 am

Re: Jeep Grill Firepit

Post by ConcFab »

Thank you! I am donating a fire pit to the Maine Warrior Salute off-road fundraiser in August. This is much better than what I had planned. I am sure it will raise a lot of money for a good cause!
awkjesse
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Tue Jun 06, 2017 8:58 am

Re: Jeep Grill Firepit

Post by awkjesse »

This is awesome!!
montanarose
1.5 Star Member
1.5 Star Member
Posts: 37
Joined: Mon Apr 23, 2012 6:07 pm

Re: Jeep Grill Firepit

Post by montanarose »

Thank you very much for your time :)
montanarose
1.5 Star Member
1.5 Star Member
Posts: 37
Joined: Mon Apr 23, 2012 6:07 pm

Re: Jeep Grill Firepit

Post by montanarose »

Hello,, to cook on the grate is there any kind of special spray you apply first?? Thanks ;)
izzyscages
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Sun Jun 16, 2013 4:25 pm

Re: Jeep Grill Firepit

Post by izzyscages »

I'm a little slow today... are there two different versions? One with legs, one without?
jabtronic
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Tue Jan 26, 2016 2:32 am

Re: Jeep Grill Firepit

Post by jabtronic »

Is it just me or did anybody notice the slots and tabs in the dxf posted don't link up with each other? I'm using CorelDraw I can't open the original PCM file.

The only slots that seem the correct size are the vertical ones on the front and back panels.
slots3.PNG
slots2.PNG
slots1.PNG
Something to keep in mind
EDIT: Another small issue is the tabs on the bottom plate and the grill are not perfectly inline with each opposite side but the difference is so minimal (0.32mm out) it shouldn't make a difference unless your slot tolerances are really tight.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Kitch940
1 Star Member
1 Star Member
Posts: 14
Joined: Sun Feb 14, 2016 11:38 am

Re: Jeep Grill Firepit

Post by Kitch940 »

jabtronic wrote:Is it just me or did anybody notice the slots and tabs in the dxf posted don't link up with each other? I'm using CorelDraw I can't open the original PCM file.

The only slots that seem the correct size are the vertical ones on the front and back panels.

Something to keep in mind
EDIT: Another small issue is the tabs on the bottom plate and the grill are not perfectly inline with each opposite side but the difference is so minimal (0.32mm out) it shouldn't make a difference unless your slot tolerances are really tight.

Yes I had to go through and redo all the tabs and slots and align them all up. The original file couldn't have worked the way it was. Still was a good start though!
nicalvarado
1.5 Star Member
1.5 Star Member
Posts: 36
Joined: Wed Jul 08, 2015 3:50 pm

Re: Jeep Grill Firepit

Post by nicalvarado »

Looks great!
Uzaree
1.5 Star Member
1.5 Star Member
Posts: 42
Joined: Sat Sep 02, 2017 12:32 am
Location: Canton, MS.
Contact:

Re: Jeep Grill Firepit

Post by Uzaree »

Nice, I like that!
Welding14
1 Star Member
1 Star Member
Posts: 19
Joined: Tue Oct 10, 2017 7:25 pm

Re: Jeep Grill Firepit

Post by Welding14 »

Thanks looks good
Jwagnon89
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Fri Oct 13, 2017 4:03 pm
Location: Athens Alabama

Re: Jeep Grill Firepit

Post by Jwagnon89 »

Does anyone want to share their revised version of this using 11 gauge? Thanks!
Dynatorch 5x10 Super B with water table
Thermal Dynamics A80
Miller 250x
Protools 105 tubing bender
JD2 beast notcher
recon44095
1.5 Star Elite Contributing Member
1.5 Star Elite Contributing Member
Posts: 49
Joined: Sat Jul 20, 2013 12:42 am
Contact:

Re: Jeep Grill Firepit

Post by recon44095 »

This one cuts good for me

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

4X4 Plasma Cam DHC2
w/down draft Hypertherm 45
3x4x6 home made powder coating oven
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”