Harley Davidson firepit

Post by **DXF** » Thu Jul 28, 2016 11:42 am

Cut this out of 14 gage. Designing a removable grill out of 14 gage stainless steel. Assembly takes (92) stainless steel button head screws and nuts. Amazingly all the holes lined up perfectly!

Dave Hanks

gamble · Post by **gamble** » Thu Jul 28, 2016 12:24 pm

That looks great! That's a lot of bolts

Think it will warp?

abcofab · Post by **abcofab** » Thu Jul 28, 2016 2:01 pm

Looks great and a little thicker than 14 ga
If you radius the legs you sell it as a rocking cradle

Post by **DXF** » Thu Jul 28, 2016 3:12 pm

gamble wrote:That looks great! That's a lot of bolts

Think it will warp?

It probably will warp. Thought the bends might stiffen it up some. I'll find out when I burn it in.

Dave Hanks

cross-trax · Post by **cross-trax** » Thu Jul 28, 2016 5:00 pm

Looks great, I thought it could double as a cradle as well.

Post by **DXF** » Thu Jul 28, 2016 5:42 pm

cross-trax wrote:Looks great, I thought it could double as a cradle as well.

Had the same thought......or maybe a jack stand for Harleys.....a planter......or a light fixture over a pool table?

Dave Hanks

SlagBandit · Post by **SlagBandit** » Tue Aug 02, 2016 6:48 pm

That is outstanding!!! Great Job!

Post by **DXF** » Tue Aug 02, 2016 10:16 pm

SlagBandit wrote:That is outstanding!!! Great Job!

Thanks.....my job is never ending.

Dave Hanks

B Holmes · Post by **B Holmes** » Thu Aug 04, 2016 9:53 am

That is AWESOME!! Great design. Love the bolts. Are they carriage bolts, or button head cap screws?

Post by **DXF** » Tue Aug 09, 2016 1:51 pm

A little paint covers a multitude of sin.....my Dad used to say.

Dave Hanks

Buzzard Gut · Post by **Buzzard Gut** » Sun Aug 28, 2016 11:16 pm

Wow! that turned out nice Dave! Another fine job!

plasma88man · Post by **plasma88man** » Mon Mar 27, 2017 12:29 pm

IS there a file on the site for this one, for some reason I can log in then get bumped off. Any one else having the same issue?

Corfabrication · Post by **Corfabrication** » Mon Mar 27, 2017 12:36 pm

pretty brave. have you gotten a cease and desist order yet?

Post by **DXF** » Mon Mar 27, 2017 6:14 pm

Corfabrication wrote:pretty brave. have you gotten a cease and desist order yet?

Actually.....what I'm looking for is an order approved by Harley Davidson.

Corfabrication · Post by **Corfabrication** » Mon Mar 27, 2017 7:53 pm

DXF wrote:
Corfabrication wrote:pretty brave. have you gotten a cease and desist order yet?
Actually.....what I'm looking for is an order approved by Harley Davidson.

I hope it works out for you.

Voesenekcnc · Post by **Voesenekcnc** » Tue Aug 01, 2017 6:43 pm

would you share this dxf?

Capstone · Post by **Capstone** » Tue Aug 01, 2017 7:30 pm

Voesenekcnc wrote:would you share this dxf?

Sharing a Harlee D logo on this forum should never happen. Frankly, I'm surprised this entire thread hasn't been deleted by the Admin.

This is your very first post, which means the rules for joining should be pretty fresh... copyrighted logos are not supposed to be shared on this forum ever.

Post by **DXF** » Tue Aug 01, 2017 8:43 pm

Capstone wrote:
Voesenekcnc wrote:would you share this dxf?
Sharing a Harlee D logo on this forum should never happen. Frankly, I'm surprised this entire thread hasn't been deleted by the Admin.

This is your very first post, which means the rules for joining should be pretty fresh... copyrighted logos are not supposed to be shared on this forum ever.

I was informed by the Administrator some time back that you can post pics but not dxf files. Almost everything shared on this forum has been copied. I have seen tons of copyrighted dxf files shared on this forum......Batman, Superman, Chevy logos, Ford logos etc. I will not share Harley logo dxf files.

Dave Hanks

Capstone · Post by **Capstone** » Tue Aug 01, 2017 9:53 pm

DXF wrote:
Capstone wrote:
Voesenekcnc wrote:would you share this dxf?
Sharing a Harlee D logo on this forum should never happen. Frankly, I'm surprised this entire thread hasn't been deleted by the Admin.

This is your very first post, which means the rules for joining should be pretty fresh... copyrighted logos are not supposed to be shared on this forum ever.
I was informed by the Administrator some time back that you can post pics but not dxf files. Almost everything shared on this forum has been copied. I have seen tons of copyrighted dxf files shared on this forum......Batman, Superman, Chevy logos, Ford logos etc. I will not share Harley logo dxf files.

Dave Hanks

Fair Enough.

BlueWave · Post by **BlueWave** » Sat Aug 19, 2017 9:12 pm

That looks awesome. I realize this is an old post but I'd love to see what it looks like after some heavy use.

Biscuit1979 · Post by **Biscuit1979** » Tue Sep 05, 2017 9:55 pm

Alright quick question.... how much would you charge for something like this? Welded not bolted though

Post by **DXF** » Wed Sep 06, 2017 11:25 am

Biscuit1979 wrote:Alright quick question.... how much would you charge for something like this? Welded not bolted though

This is a prototype. I won't be able to answer that question until Harley Davidson approves it. Wish I could sell them as hundreds of Harleys cruise thru here on the weekends to ride: http://www.421thesnake.com/

Dave

Biscuit1979 · Post by **Biscuit1979** » Wed Sep 06, 2017 6:10 pm

In general, a firepit this size that is personalized for someone, no Harley emblem just a design... price?

Post by **DXF** » Wed Sep 06, 2017 6:53 pm

Biscuit1979 wrote:In general, a firepit this size that is personalized for someone, no Harley emblem just a design... price?

With a simple design cut out probably $250-$400+ depending on the design. It would be cut out of .187"-.250" and welded. I very rarely do custom jobs so I'm not real sure on the price.....just guessing. I'm using this one to stack bags of trash in at the moment.

Dave

Biscuit1979 · Post by **Biscuit1979** » Wed Sep 06, 2017 9:35 pm

Thanks. I work in a plate mill and can buy plate for 10 cents a pound. So it should be easy to make some money off these. Thanks again

Harley Davidson firepit

Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit

Re: Harley Davidson firepit