Hi folks,
Newly registered on this forum - it's an absolute goldmine to someone like myself! I'm based in the U.K. and have just recently purchased Swiftcut PRO-3000 with Hypertherm 125.
I'm totally new to this CNC milarky so it's a huge learning curve! New CAD programmes to get to grips with, how to use files, learning the does and dont's etc.
I'm sure I'll have plenty of questions for everyone to answer!
Cheers!
Hello, Newbie from England
-
- 5 Star Elite Contributing Member
- Posts: 2605
- Joined: Thu Jul 24, 2008 11:15 am
Re: Hello, Newbie from England
Welcome to the forum AD80, you will find this site to be the best resource ever when getting started. Helped me a ton and I can't thank all the members who's posts have assisted me in my struggles getting started
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Hello, Newbie from England
Hi, welcome to the forum, that's a nice setup you got there!
I'm originally from Lancashire but moved over to Ireland a few years ago.
It is a fair bit to get into, but all good fun or mostly!
plenty of help out there, just ask if you get stuck.
I'm originally from Lancashire but moved over to Ireland a few years ago.
It is a fair bit to get into, but all good fun or mostly!
plenty of help out there, just ask if you get stuck.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
-
- 1 Star Member
- Posts: 16
- Joined: Fri Jul 14, 2017 4:12 pm
Re: Hello, Newbie from England
Thanks - when I'm left scratching my head it'll be the first place I'll look!plasmanewbie wrote:Welcome to the forum AD80, you will find this site to be the best resource ever when getting started. Helped me a ton and I can't thank all the members who's posts have assisted me in my struggles getting started
-
- 1 Star Member
- Posts: 16
- Joined: Fri Jul 14, 2017 4:12 pm
Re: Hello, Newbie from England
Thanks Sean - Yeah it's a great setup, really happy with it. Just need to learn to use it now! It takes getting used to then software, im using solid edge 2d draft, solid works 3D and Inkscape.SeanP wrote:Hi, welcome to the forum, that's a nice setup you got there!
I'm originally from Lancashire but moved over to Ireland a few years ago.
It is a fair bit to get into, but all good fun or mostly!
plenty of help out there, just ask if you get stuck.
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Hello, Newbie from England
Welcome aboard AD80. Please become a contriduting member. That will allow you to download many files. It will be the best $20 you ever spend.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 1 Star Member
- Posts: 16
- Joined: Fri Jul 14, 2017 4:12 pm
Re: Hello, Newbie from England
Thanks - just contributed!little blue choo wrote:Welcome aboard AD80. Please become a contriduting member. That will allow you to download many files. It will be the best $20 you ever spend.
Rick
- Gamelord
- 4.5 Star Member
- Posts: 1637
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Hello, Newbie from England
Welcome, if you have any questions, post em up, plenty of people here who are eager to help.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD