Page one first postAbcmfg123 wrote:Can i please get this file?
Geo Fire pit
-
- 2 Star Member
- Posts: 73
- Joined: Fri Jun 01, 2012 9:50 pm
- Location: Brasstown n.c.
Re: Geo Fire pit
-
- 2 Star Member
- Posts: 73
- Joined: Fri Jun 01, 2012 9:50 pm
- Location: Brasstown n.c.
Re: Geo Fire pit
I have a customer wanting a floral fire pit similar to this where'd you get the filesfor this our could you share itScotchandIron wrote:Couple more shots
- Peechy
- 3 Star Elite Contributing Member
- Posts: 338
- Joined: Tue Nov 11, 2014 9:12 pm
- Contact:
Re: Geo Fire pit
Araco92 wrote:How are you poscised?Peechy wrote:This is the other file I have hope someone can use it![]()
Yes and there is also a 3d soccer ball file on makecnc.com way better , I believe the file is worth $3 .. good luck and have fun!
![Cool 8-)](./images/smilies/icon_cool.gif)
![Cool 8-)](./images/smilies/icon_cool.gif)
- johnp
- 1.5 Star Member
- Posts: 35
- Joined: Fri Feb 24, 2017 10:22 am
- Contact:
Re: Geo Fire pit
Seems like it would be very important to get the angles correct when welding this together? Any tips on doing that? Or has anyone made a little jig to assist in the process of assembly?
-
- 2 Star Member
- Posts: 54
- Joined: Sat Aug 13, 2016 9:50 am
Re: Geo Fire pit
No jig necessary. Just line up the pieces like you are putting a puzzle together.johnp wrote:Seems like it would be very important to get the angles correct when welding this together? Any tips on doing that? Or has anyone made a little jig to assist in the process of assembly?
-
- 1/2 Star Member
- Posts: 6
- Joined: Tue Jun 14, 2016 6:38 pm
Re: Geo Fire pit
I am super new to all this bending and angles. How are y'all bending the 1/4 on these. Even the lighter metal? I'm going to cut my first one out of 14g just to make sure all it good with my designs in it. Then just use it as a table. Put a top on it
Every panel is a different design, that way I can figure out how I want my pattern to run.
Thanks in Advance.
![Smile :)](./images/smilies/icon_e_smile.gif)
Thanks in Advance.
-
- 1 Star Member
- Posts: 20
- Joined: Thu May 11, 2017 10:38 am
Re: Geo Fire pit
Thankyou and awsome
-
- 1/2 Star Member
- Posts: 1
- Joined: Sun Jun 04, 2017 2:03 am
Re: Geo Fire pit
This is awesome ... I'm all new to this stuff and wanna do one with a star wars theme.
-
- 2 Star Member
- Posts: 73
- Joined: Sun Dec 17, 2017 2:38 pm
Re: Geo Fire pit
great work, thanks for sharing.
-
- 2 Star Member
- Posts: 73
- Joined: Sun Dec 17, 2017 2:38 pm
Re: Geo Fire pit
great work, thanks for sharing.
-
- 1 Star Member
- Posts: 10
- Joined: Wed Sep 28, 2016 5:59 am
Re: Geo Fire pit
thank you for sharing!
-
- 2 Star Member
- Posts: 73
- Joined: Fri Jun 01, 2012 9:50 pm
- Location: Brasstown n.c.
Re: Geo Fire pit
I dont bend each panel is cut separate then weldPlasmaGranny wrote:I am super new to all this bending and angles. How are y'all bending the 1/4 on these. Even the lighter metal? I'm going to cut my first one out of 14g just to make sure all it good with my designs in it. Then just use it as a table. Put a top on itEvery panel is a different design, that way I can figure out how I want my pattern to run.
Thanks in Advance.
- hdfaster
- 3.5 Star Elite Contributing Member
- Posts: 501
- Joined: Thu Jan 07, 2010 11:38 pm
Re: Geo Fire pit
This is what I came up with in 2015 when the soccer ball scandal began.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- hdfaster
- 3.5 Star Elite Contributing Member
- Posts: 501
- Joined: Thu Jan 07, 2010 11:38 pm
Re: Geo Fire pit
All pieces are cut separately then welded together. I also put a 6" LP fire pit burner in the bottom.
-
- 1 Star Member
- Posts: 14
- Joined: Sun Nov 26, 2017 10:03 am
Re: Geo Fire pit
Sorry, wrong post....
Sorry to bring up an old thread, but, Is the file in post 1 for half of the unit?
If so, when making 2 of them, will they fit together when they are cut to make a ball?
Thanks for any input.
Sorry to bring up an old thread, but, Is the file in post 1 for half of the unit?
If so, when making 2 of them, will they fit together when they are cut to make a ball?
Thanks for any input.
4x8 Premier Plasma Table
Hypertherm 45xp
Inkscape
Viacad
Sheetcam
Mach3
Proma 150 THC
Hypertherm 45xp
Inkscape
Viacad
Sheetcam
Mach3
Proma 150 THC
-
- 1/2 Star Member
- Posts: 6
- Joined: Tue Jan 31, 2012 9:42 pm
- Location: Lakeland
Re: Geo Fire pit
I am not an attorney but anyone worried about copyright issues needs to actually read the Copyright information. Its very informative, You cant copyright a shape of common or familiar symbols.(Fleur De Lys. star ying yang heart a diamong etc) This guy Louis' registration is a joke. It cant cover anything broad. Actually if anyone ever built one before him in the past(which has been done, the shape that is) he(Louis) could be in jeopardy of stealing their intellectual property. But it is a common shape that has been around forever and would not fall under an Architectural design. You can copyright all 2d patterns. The only thing he can copyright is specific artwork inserted if it is his intellectual property not the process.
This link covers what is not covered by copyrights
https://www.copyright.gov/circs/circ33.pdf
https://www.copyright.gov/circs/circ01.pdf
This link covers what is not covered by copyrights
https://www.copyright.gov/circs/circ33.pdf
https://www.copyright.gov/circs/circ01.pdf
-
- 2 Star Member
- Posts: 56
- Joined: Tue May 17, 2016 1:21 pm
Re: Geo Fire pit
[quote="gotee"]I am not an attorney but anyone worried about copyright issues needs to actually read the Copyright information. Its very informative, You cant copyright a shape of common or familiar symbols.(Fleur De Lys. star ying yang heart a diamong etc) This guy Louis' registration is a joke. It cant cover anything broad. Actually if anyone ever built one before him in the past(which has been done, the shape that is) he(Louis) could be in jeopardy of stealing their intellectual property. But it is a common shape that has been around forever and would not fall under an Architectural design. You can copyright all 2d patterns. The only thing he can copyright is specific artwork inserted if it is his intellectual property not the process.
This link covers what is not covered by copyrights
https://www.copyright.gov/circs/circ33.pdf
https://www.copyright.gov/circs/circ01.pdf[/quote]
lol!
This link covers what is not covered by copyrights
https://www.copyright.gov/circs/circ33.pdf
https://www.copyright.gov/circs/circ01.pdf[/quote]
lol!
-
- 2 Star Member
- Posts: 73
- Joined: Fri Jun 01, 2012 9:50 pm
- Location: Brasstown n.c.
Re: Geo Fire pit
full ball you'll need to cut some half'sout of the hexagonsProbird wrote:Sorry, wrong post....
Sorry to bring up an old thread, but, Is the file in post 1 for half of the unit?
If so, when making 2 of them, will they fit together when they are cut to make a ball?
Thanks for any input.
-
- 2 Star Member
- Posts: 73
- Joined: Fri Jun 01, 2012 9:50 pm
- Location: Brasstown n.c.
Re: Geo Fire pit
Still starting crap a Louis surprised your still aloud in this group after all those you ripped offLmpsr70357 wrote:gotee wrote:I am not an attorney but anyone worried about copyright issues needs to actually read the Copyright information. Its very informative, You cant copyright a shape of common or familiar symbols.(Fleur De Lys. star ying yang heart a diamong etc) This guy Louis' registration is a joke. It cant cover anything broad. Actually if anyone ever built one before him in the past(which has been done, the shape that is) he(Louis) could be in jeopardy of stealing their intellectual property. But it is a common shape that has been around forever and would not fall under an Architectural design. You can copyright all 2d patterns. The only thing he can copyright is specific artwork inserted if it is his intellectual property not the process.
This link covers what is not covered by copyrights
https://www.copyright.gov/circs/circ33.pdf
https://www.copyright.gov/circs/circ01.pdf
lol!
-
- 1 Star Member
- Posts: 13
- Joined: Sat May 20, 2017 11:30 am
- Location: Fernandina Florida
- Contact:
-
- 1/2 Star Member
- Posts: 7
- Joined: Tue Jul 16, 2019 4:01 am
Re: Geo Fire pit
this is awesome but can you share the dxfs for the moose and the two trees you have in the big one and the base please
- Peechy
- 3 Star Elite Contributing Member
- Posts: 338
- Joined: Tue Nov 11, 2014 9:12 pm
- Contact:
-
- 2 Star Member
- Posts: 73
- Joined: Fri Jun 01, 2012 9:50 pm
- Location: Brasstown n.c.
Re: Geo Fire pit
sorry those where purchased fileswaynesworld69a wrote: ↑Tue Jul 16, 2019 4:08 pm this is awesome but can you share the dxfs for the moose and the two trees you have in the big one and the base please
-
- 1/2 Star Member
- Posts: 7
- Joined: Tue Jul 16, 2019 4:01 am
Re: Geo Fire pit
Thats cool can you please tell me where you bought them from i would like to buy them...iv been hunting for some the same but carnt find any