Belgian Shepherd burning and etched into the stainless steel
Belgian Shepherd
- JD770
- 2 Star Elite Contributing Member
- Posts: 62
- Joined: Wed Jun 23, 2010 3:23 pm
- Contact:
Belgian Shepherd
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2643
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Belgian Shepherd
Very nice piece. Thanks for sharing.
Larry
Larry
- Gogogadget62
- 1 Star Member
- Posts: 17
- Joined: Fri Mar 17, 2017 9:49 pm
Re: Belgian Shepherd
This is a beautiful piece, would you care to share the files in DXF, and tell me how to convert a rar file to dxf , thanks Larry
Dan Gauthier
5x10 Samson
Miller 185 wire feeder
600 Hypertherm
45 Hypertherm
85 Hypertherm
40 ton press and dies
powder coating
80 gallon DeVAIR compressor 5Hp
5x10 Samson
Miller 185 wire feeder
600 Hypertherm
45 Hypertherm
85 Hypertherm
40 ton press and dies
powder coating
80 gallon DeVAIR compressor 5Hp
-
- 2.5 Star Member
- Posts: 135
- Joined: Tue Sep 02, 2008 4:33 pm
Re: Belgian Shepherd
Dxf is too large at 1.9 Mb (not the cleanest file) so attached is an svg from the rar file which should work for you. Hope this helps
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2643
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Belgian Shepherd
Gogogadget62 wrote:This is a beautiful piece, would you care to share the files in DXF, and tell me how to convert a rar file to dxf , thanks Larry
All I did was use WinRAR to unrar the file. It's almost 2meg so there is no way it can be posted as a DXF file. If you can not get it unrared any other way just send me a PM with your email address and I'll send you the DXF file.
Larry
- Gogogadget62
- 1 Star Member
- Posts: 17
- Joined: Fri Mar 17, 2017 9:49 pm
Re: Belgian Shepherd
ok thanks Larry don't have the program but going to look into it thanks for the reply
Dan Gauthier
5x10 Samson
Miller 185 wire feeder
600 Hypertherm
45 Hypertherm
85 Hypertherm
40 ton press and dies
powder coating
80 gallon DeVAIR compressor 5Hp
5x10 Samson
Miller 185 wire feeder
600 Hypertherm
45 Hypertherm
85 Hypertherm
40 ton press and dies
powder coating
80 gallon DeVAIR compressor 5Hp