New house with gravel drive. Original skids kept digging in. Simple design but works like a charm. Made out of 1/4".
Comparison to factory skids.
Painted and installed.
Snow Blower Skids/Feet
- kb3gun
- 2.5 Star Member
- Posts: 194
- Joined: Thu Feb 09, 2012 6:40 pm
- Location: Shanksville, PA
Snow Blower Skids/Feet
-Smitty
Torchmate 4X4 Growth Series w/AVHC
Hypertherm PM45 w/ Machine Torch
Miller Syncrowave 210 TIG
Torchmate 4X4 Growth Series w/AVHC
Hypertherm PM45 w/ Machine Torch
Miller Syncrowave 210 TIG
-
- 2.5 Star Member
- Posts: 228
- Joined: Sun Sep 27, 2009 9:48 pm
Re: Snow Blower Skids/Feet
Nice job
Tim
Red Robin Creatives
Tim
Red Robin Creatives
- steel 35
- 3.5 Star Member
- Posts: 634
- Joined: Sun Jan 11, 2015 11:12 am
- Location: N of Cali.
Re: Snow Blower Skids/Feet
Thanks for sharing I think, while I was looking at you picture thinking how cool that is ; looked out and could see my lovly bride behind my snow blower with one rotor turning. While knocking the piece out found I indeed need a new foot Im on it.
Moma 's got new shoes! be
Moma 's got new shoes! be
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
- kb3gun
- 2.5 Star Member
- Posts: 194
- Joined: Thu Feb 09, 2012 6:40 pm
- Location: Shanksville, PA
Re: Snow Blower Skids/Feet
Looks good! Glad it sparked some interest for you. I'm sure your new ones will last much longer than the originals.
I kept getting gravel wedging under the impeller and locking it up. Takes a hammer and chisel most times to knock it out. Have had none of that since the new shoes went on. I have mine set about 1-1/2" high.
I kept getting gravel wedging under the impeller and locking it up. Takes a hammer and chisel most times to knock it out. Have had none of that since the new shoes went on. I have mine set about 1-1/2" high.
-Smitty
Torchmate 4X4 Growth Series w/AVHC
Hypertherm PM45 w/ Machine Torch
Miller Syncrowave 210 TIG
Torchmate 4X4 Growth Series w/AVHC
Hypertherm PM45 w/ Machine Torch
Miller Syncrowave 210 TIG